Makita 6913D Instruction Manual page 6

Installing or removing the battery cartridge
0
Always switch off the tool before insertion or removal of the battery cartridge.
DC1290
Approx.
60
min.
1200
1201 / I 201 A
-
0
To remove the battery cartridge, pull out
the
set
plate on the tool and grasp both
sides of the cartridge while withdrawing it
from the tool.
0
To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it into
place. Snap the
set
plate back into place.
Be sure to close the set plate fully before
using the tool.
DC1201
Approx.
45
min.
Approx.
60
min.
\
Battery cartridge
1
0
Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily,
it
is not being inserted correctly.
Charging
0
Your new battery cartridge is not charged.
You will need
t o
charge it before use. Use
the fast charger Model DC1201 to charge
the battery cartridge.
0
Plug the fast charger into the proper A/C
voltage source. The charging light will
flash in green color.
0
Insert the battery cartridge
so
that the
plus and minus terminals on the battery
cartridge are on the same sides as their
respective markings on the fast charger.
Charging light
6