Makita 6913D Instruction Manual page 4

IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER &
BATTERY CARTRl DG E
Length of Cord (Feet)
AWG Size of Cord
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
1 1 .
12.
4
25 50 100 150
18
18 18 16
SAVE THESE INSTRUCTIONS
-
This manual
contains important safety and operating instructions for battery charger.
Before using battery charger, read all instructions and cautionary markings
on
(1)
battery charger,
(2)
battery, and
(3)
product using battery.
CAUTION - To reduce risk of injury, charge only MAKITA Battery Cartridge
1200, 1201 & 1201A.
Other types of batteries may burst causing personal
injury and damage.
Do not expose charger t o rain or snow.
Use of an attachment not recommended or sold by the battery charger
manufacturer may result in a risk of fire, electric shock, or injury t o persons.
To reduce risk of damage t o electric plug and cord, pull by plug rather than
cord when disconnecting charger.
Make sure cord is located so that
it
will not be stepped on, tripped over, or
otherwise subjected t o damage or stress.
An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape
b. That extension cord is properly wired and
in
good electrical condition; and
c. That wire size is at least as large as the one specified in the table below.
TABLE 1
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENSION CORDS FOR BATTERY CHARGERS
as those of plug on charger;