Accessories; Technical Data - Blaupunkt TravelPilot Lucca 5.2 Operating And Installation Instructions

Accessories

You can obtain a cable (Smart Cable) as an acces-
sory which expands the functions of the Connect
Cradle with the following functions:
• Power supply of the Lucca.
• Switching the Lucca on and off via ignition.
• Muting the radio for travel instructions.
• Voice output and music playback of the Lucca
via the loudspeakers of the car sound system.
• Speed signal (speedometer signal) to be able
to continue navigating during GPS shadow-
ing, e.g. inside a tunnel.
The speed signal (speedometer signal) must be
available in the vehicle at the radio connector.

Technical data

TFT display
Active colour matrix,
4 inch, 16:9 diagonal,
480 x 272 pixel
Audio
Built-in loudspeaker:
Mono, 8 Ohm, max 1 W
Audio output via Connect Cradle:
Stereo, V = 1 V , R
max eff
Battery
Voltage: 3.7 V
Capacity: 2600 mAh
Weight
approx. 235 g
Charger cable for cigarette lighter
Input voltage: 12 V to 24 V
Fuse in the connector: 2 A
Battery charger
Input voltage: 90 V to 240 V, 50/60 Hz
Output voltage: 12 V
Output current: max. 1 A
GPS receiver
20-channel Nemerix
Software
© 2006 NAVIGON Company.
All rights reserved.
Technical data
rms
= 600 Ohm
typ
43