Route Information; Signpost Information; Speed - Blaupunkt TravelPilot Lucca 5.2 Operating And Installation Instructions

u
Activate the Point of interest entry so that
all points of interest are displayed on the map
(default setting).
u
Activate the Street names (2D) entry so that
the street names are displayed on the map
(only possible in 2-D display).
u
Touch the
tings menu.

Route Information

u
In the Settings menu, touch the Route infor-
mation button.
The Route information menu is displayed.
u
Switch the desired route information on or off
with the corresponding buttons.
The corresponding information for the next
stage (upper area) and the complete route
(lower area) is displayed on the map.
u
Touch the
tings menu.

Signpost information

u
On the second page of the Settings menu,
touch Signpost information.
The Signpost information menu is displayed.
button to return to the Set-
button to return to the Set-
u
Touch the Show traffi c signs button to acti-
vate or deactivate the display of the exit traf-
fi c signs.
u
Touch the
tings menu.

Speed

u
On the second page of the Settings menu,
touch Speed.
The Speed menu opens.
In the Speed menu you can defi ne whether speed
limits should be displayed during the navigation
and whether you should be warned audibly if you
are exceeding the speed limit.
• Display signs
u
Touch the Show traffi c signs button to switch
among the modes Always, On speeding only
or Never.
• Warning in urban areas
– The Warning in urban areas button
shows the level of the speed-reading at
which you are audibly warned inside of
build-up areas.
u
Touch the Warning in urban areas button to
change the value or to set it to Never.
• Warning in rural areas:
– The Warning in rural areas button shows
the level of the speed-reading at which
you are audibly warned outside of build-
up areas.
Navigation
button to return to the Set-
29