Ec Declaration Of Conformity - Husqvarna 525PT5S Owner's Manual

Guide bar and saw chain combinations
The following combinations are CE approved.
Guide bar
Length, inch
10
12
H00
EC Declaration of Conformity (Applies to Europe only)
We, Husqvarna AB, SE561 82 Huskvarna, Sweden, tel: +4636146500, declare that the pole saws Husqvarna
525PT5S with serial numbers dating from 2015 onwards (the year is clearly stated on the rating plate, followed by the
serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2009, EN ISO 11680-1:2011, EN ISO 14982:2009
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered:
0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination
in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for EC type examination
in accordance with annex IV, has the number:
0404/15/2439
Huskvarna june 1, 2015
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Pitch, inch
1/4
1/4
Gauge, mm
Saw chain
Type
Husqvarna H00
Husqvarna H00
Length, drive links
(no.)
58
64
5806874-01
English – 29