Telescopic Function; Adjusting The Harness - Husqvarna 525PT5S Owner's Manual

Telescopic function

The shaft of the machine is telescopic. To change the
length of the shaft, do the following:
• Undo the knob.
• Pull out the shaft to the desired length.
• Tighten the knob.

Adjusting the harness

You should always use the harness with the machine to
give maximum control over the machine and reduce the
risk of fatigue in your arms and back.
• Put on the harness.
• Hook the harness in one of the hooks on the machine.
ASSEMBLY
• Adjust the length of the harness so that the support
hook is roughly level with your right hip.
–
English 17