Playing Tracks Stored On A Usb Storage Device; Basic Operations - Onkyo CR-N765 Instruction Manual

Playing tracks stored on a USB storage device

Basic operations

You can connect a USB storage device to the USB port
on the front or rear panel and play music files on it.
0 For information on supported USB storage devices
and file formats, see "Compatible devices/media/file
formats".
0 By default, the power supply function for the USB port
on the front panel is enabled. For details on the power
supply function and information on its setting, see
"SleepCharge" under "Menu settings" under "Various
settings".
1. Press the USB button repeatedly to select "USB(F)" or
"USB(R)" on the display.
0 To use the USB port on the front panel, select
"USB(F)"; to use the one on the rear panel, select
"USB(R)".
2. Connect a USB storage to the selected USB port.
When a USB storage is detected, its volume label will
be displayed.
0 Depending on the USB storage device, reading
data from it may take some time.
0 When there is no compatible music file format on a
USB storage, "No Item" will be displayed.
0 If "No storage" appears, reconnect the USB storage
device.
20
3. Press the ENTER button.
The name of the track or folder appears.
4. Use the direction ( / ) buttons to select a track or a
folder and press the playback (1) button.
Playback starts.
0 To return to the previous display, press the
RETURN button.
0 When a folder is selected, the first track in that
folder will start playing back.
0 You can also select a folder and then press the
ENTER button to select tracks inside that folder.
0 Only the music files in the same level of the folder
are played. You can also set repeat playback mode
to Full and play all tracks stored on the USB storage
device.
∫ Stop: Press the stop (∫) button.
∫ Pause: Press the pause (;) button. Playback
resumes when you press the pause (;) button again.
∫ Skip: Press the skip (:/9) buttons to skip to
tracks before or after the current track. Keep pressing
until the desired track is selected.
0 During playback, press the :button once to return
to the beginning of the current track. To return to the
beginning of the previous track, keep pressing the
: button.
∫ Search backward/forward: During playback, press
the search (6/5) buttons to search backward/
forward. Release the button when you find the desired
part. Playback resumes from that point.
∫ Information shown on the display: Press the
DISPLAY button repeatedly during playback to change
the information shown on the display.
Title (if file has ID3 tag) Artist (if file has ID3 tag)
Album (if file has ID3 tag)
Playback time of current track
rate and bit rate
Elapsed time of current track
File format, sampling