Important Notes; Safety Precautions - RCF DX4008 Installation And Operation Manual

Before connecting and using this product, please read this instruction manual carefully and keep
it on hand for future reference. The manual is to be considered an integral part of this product
and must accompany it when it changes ownership as a reference for correct installation and use
as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this
product.
WARNING:
To prevent the risk of fire or electric shock, never expose this product to rain or
humidity (except in case it has been expressly designed and made for outdoor use).

SAFETY PRECAUTIONS

1. All the precautions, in particular the safety ones, must be read with special attention, as
they provide important information.
2.1 POWER SUPPLY FROM MAINS (direct connection)
a) The mains voltage is sufficiently high to involve a risk of electrocution; therefore, never
install or connect this product with the power supply switched on.
b) Before powering up, make sure that all the connections have been made correctly and
the voltage of your mains corresponds to the voltage shown on the rating plate on
the unit, if not, please contact your RCF dealer.
c) The metallic parts of the unit are earthed by means of the power cable. In the event that
the current outlet used for power does not provide the earth connection, contact a
qualified electrician to earth this product by using the dedicated terminal.
d) Protect the power cable from damage; make sure it is positioned in a way that it cannot
be stepped on or crushed by objects.
e) To prevent the risk of electric shock, never open the product: there are no parts inside
that the user needs to access.
2.2 POWER SUPPLY BY MEANS OF AN EXTERNAL ADAPTER
a) Use the dedicated adapter only; verify the mains voltage corresponds to the voltage
shown on the adapter rating plate and the adapter output voltage value and type
(direct / alternating) corresponds to the product input voltage, if not, please contact
your RCF dealer; verify also that the adapter hasn't been damaged due to possible
clashes / hits or overloads.
b) The mains voltage, which the adapter is connected to, is sufficiently high to involve a risk
of electrocution: pay attention during the connection (i.e. never do it with wet hands)
and never open the adapter.
c) Make sure that the adapter cable is not (or cannot be) stepped on or crushed by other
objects (pay particular attention to the cable part near the plug and the point where it
leads out from the adapter).
3. Make sure that no objects or liquids can get into this product, as this may cause a short circuit.
4. Never attempt to carry out any operations, modifications or repairs that are not expressly
described in this manual.
Contact your authorized service centre or qualified personnel should any of the following occur:
• the product does not function (or functions in an anomalous way);
• the power supply cable has been damaged;
• objects or liquids have got into the unit;
• the product has been subject to a heavy impact.
5. If this product is not used for a long period, switch it off and disconnect the power cable.
6. If this product begins emitting any strange odours or smoke, switch it off immediately and
disconnect the power supply cable.

IMPORTANT NOTES

17