Powering Up The Device - RCF DX4008 Installation And Operation Manual

POWERING UP THE DEVICE

• After powering up the unit, the following initialization screen is displayed on the LCD:
• The initialization process takes about 8 seconds and during that period the unit boots and
displays the DX 4008 firmware version.
• After the initialization process is finished the DX 4008 displays its main screen:
• The screen shows the current program number and program name assigned to the unit. The
program assigned is always the last program the user recalled or stored before powering down
the unit.
• Now the DX 4008 is ready to operate.
22
** RCF SPA ***
** DX 4008 CONTROLLER ***
----- INITIALIZING ------
** RCF SPA ***
******** DX 4008 ********
PROGRAM:01 XXXXXXXXXXXX