RCF DX4008 Installation And Operation Manual page 25

FILTER LOW CROSSOVER
CONFIGURATION
None
Highpass
Lowpass
Bandpass
LIMIT - OUTPUT LIMTER
OUT_1: XXXXXX
• THRESH - Limit Threshold. Ranges from -20 to +20dBu in 0.5dB steps.
• ATTACK - Attack time. Ranges from 0.3 to 1ms in 0.1ms steps, then ranges from 1 to 100ms in
1ms steps.
• RELEASE - Release time. It can be set at 2X, 4X, 8X, 16X or 32X the attack time.
SOURCE - INPUT SOURCE
OUT_1: XXXXXX
• 1,2,3,4 – Input channel source for the current output channel. it can be set to enable the input
source (On) or disable it (Off ). If more than one input source are enabled, they will be added
together as the source for the current output channel.
CH-NAME - CHANNEL NAME
OUT_1: XXXXXX MENU: Ch-Name
• Refer to the Input Menus for details
HIGH CROSSOVER
POINT POINT
FTRL Off FTRH Off
FTRL not Off FTRH Off
FTRL Off FTRH not Off
FTRL not Off FTRH not Off
MENU: Limit
THRESH: +20.0dBu
ATTACK: 100ms
RELEASE: 32x
MENU: Source
1: On 4: Off
2:Off
3:Off
NAME: XXXXXX
FRQL
FRQH
FRQL FRQH
25