Canon Legria HF R36 Instruction Manual page 180

• Depending on the TV set, additional settings may be required on the TV
itself to activate the HDMI-CEC function. Refer to the TV's instruction
manual.
• Correct operation of the HDMI-CEC function cannot be guaranteed
even when connecting the camcorder to compatible TV sets. If you
cannot use the remote control of the TV, set [Control for HDMI] to
[j Off] and operate the camcorder directly.
• The remote control of the TV can only be used to play back movies or
photos (
TV while it is set to
used, turning off the TV will automatically turn off the camcorder even if
it is recording at the time.
• We recommend not connecting more than 3 HDMI-CEC compatible
devices at a time.
• This option is not available when the camcorder is connected to an
HDTV using the supplied HDMI cable.
[HDMI Status]:
output signal from the HDMI OUT terminal.
[Distance Units]:
during manual focus.
[Demo Mode]:
features. It starts automatically when the camcorder is powered with the
compact power adapter if you leave it turned on without a memory card
for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn
off the camcorder.
[Firmware]:
You can verify the current version of the camcorder's firm-
ware, which is the software that controls the camcorder. This menu option
is usually unavailable.
[Reset All]:
Resets all of the camcorder's settings.
Downloaded From VideoCamera-Manual.com Manuals
180
Additional Information
or mode only). If the camcorder is connected to the
,
Displays a screen where you can verify the standard of the
Selects the units to use for the focusing distance display
The demonstration mode displays the camcorder's main
or mode, depending on the TV