Canon Legria HF R36 Instruction Manual page 160

Operating modes:
Setting Up a Wi-Fi Connection (Ad hoc Mode)
1 Set the camcorder to playback mode and then press
2 Set up a new connection point.
[ Wi-Fi]
>
[Set Up New]*
* To replace the current settings, touch [Edit] instead and then manually change
the settings. To delete the settings, touch [Delete] and then [Yes].
3 Enter the details of the connection.
Enter an SSID (up to 32 characters) and channel of your
choosing
method* and, if applicable, the encryption key**
* If you select [Open], you can select [No Encryption] or [WEP]. If you select
[Shared Key WEP], you will need to specify the WEP index key.
** Enter an encryption key of your choosing. The encryption key must be one of
the following.
- 5 or 10 alphanumeric characters
- 10 or 26 hexadecimal characters (0-9, A-F)
4 Touch [Automatic] to automatically obtain an IP address.
5 Touch [No].
• You can touch [Check Current Configuration] to review the network
settings.
6 Save the settings of the connection point.
[Yes]
Downloaded From VideoCamera-Manual.com Manuals
160
Wi-Fi Functions
>
[Wi-Fi Setup]
> >
[OK]
> >
[OK] [X]
>
[Network Setup]
Enter the authentication/encryption
.
>
[ ]
>
[OK]