Canon Legria HF R36 Instruction Manual page 153

5 Touch [Automatic] to automatically obtain an IP address.
• To assign the IP address manually, touch [Manual] and perform the
procedure in To manually assign an IP address (A 151).
• A screen to test the settings will appear.
6 Select whether to test the settings.
• You can touch [Check Current Configuration] to review the network
settings.
• If you touched [Yes], a test of the settings will be performed and a
confirmation screen will appear. Touch [OK].
7 Save the settings of the connection point.
[Yes]
* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]
>
[Check Current Configuration]
[ 3])
To manually enter a wireless access point (step 3)
Enter the details of the wireless access point.
Enter the access point's SSID
the authentication/encryption method* and, if applicable,
the encryption key of the access point
Continue to step 5
* If you select [Open], you can select [No Encryption] or [WEP]. If you select,
[Open]
key.
NOTES
• The functions available and the setup method will vary depending on
the specifications and characteristics of the Wi-Fi network you want to
use.
• When using Wi-Fi functions, wireless communication with an Eye-Fi
card is not possible.
Downloaded From VideoCamera-Manual.com Manuals
> >
[OK]*
> >
[Î] or [Í]
>
[WEP] or [Shared Key WEP], you will need to specify the WEP index
[X]
>
Desired connection point ([
[K] three times when finished.
> > >
[OK] [OK]
> >
[OK]
Wi-Fi Functions
1] to
Enter
153