Belt Deflection Gauge
2.4L: Manual Adjustment
1.5L: Manual Adjustment
5.7.11— Replace Air Filter Element
Remove wing nut, lock washer and flat washer from threaded rod to release air cleaner cover. See Figure 5-13
1.
Remove the air filter element and discard.
2.
Thoroughly clean air cleaner cover of any dust, dirt, or debris.
3.
Place new air filter element against adapter flange.
4.
NOTE: The air filter element is not directional.
Install air cleaner cover over threaded rod. Install flat washer, lock washer and wing nut. Tighten wing nut until
5.
snug.
Owner's Manual for Stationary Emergency Generators
Alternator Pulley
Figure 5-12. Check Accessory/Drive Belt Deflection
Water Pump Pulley
Automatic Tensioner
5.4L: Automatic Adjustment
Maintenance
39