Lynx SmartGrill Setup Manual

STEP 1—REQUIREMENTS
#
• Smart device (phone or tablet)
• 110 volt GFIC outlet at the grill
• Proper gas supply
• Home network name (SSID) & password
Name: ____________________________________________
Password: _________________________________________
• SmartGrill by Lynx serial number/PIN*
™
Serial number: _____________________________________
PIN: _______________________________________________
*Located on the top of the CPU case.
STEP 3—DOWNLOAD AND SETUP THE SMARTGRILL APP ON
#
YOUR PHONE OR TABLET AND CREATE YOUR ACCOUNT
• Go to iTunes or Google Play and download "SmartGrill by Lynx" and install
• Open the SmartGrill App and click Create Account then enter your grill serial number and PIN
then click Continue.
• Enter your email address, password and your registration information and click
Create Account. You will get a confirmation email.
• Open the confirmation email and follow instructions to activate your account.
• Now login to the SmartGrill app by entering your email and password.
**For most current version of the Quick Start Guide, please refer to your app or our website at www.lyngrills.com.
SmartGrill by Lynx
Quick Start Power Connectivity
& Wi-Fi Setup Process**
iPhone 5 or greater or
iPad version 2.0 or greater
STEP 2—SETUP YOUR SMARTGRILL
#
• If not already done, locate the 6 wire connections inside the grill
and attach them to the SmartGrill computer case. Each cable is
labeled to coincide with the port on the SmartGrill computer.
Please be sure to connect the cables as per labeling on cable
and computer.
• Locate the antenna in the white box inside the grill and screw
into the back of the SmartGrill computer case.
• Plug the power cable from the SmartGrill into a 110v GFIC
electrical outlet.
• Wait 20-60 seconds to hear SmartGrill say "SmartGrill is ready."
™
Android 4.4 or greater
P/N 35407