Specifications; Declaration Of Conformity - JBL Soundpoint SP5 Owner's Manual

Table of Contents

Advertisement

SPECIFICATIONS

SP5
SP6
Frequency Response
Frequency Response
45Hz– 20kHz (–10dB)
38Hz – 20kHz (–10dB)
Recommended Maximum
Recommended Maximum
Amplifier Power †
Amplifier Power †
60 watts
80 watts
Impedance
Impedance
8 ohms nominal
8 ohms nominal
Sensitivity (2.83V/1m)
Sensitivity (2.83V/1m)
87dB
88dB
Crossover Frequency
Crossover Frequency
3,000Hz
2,800Hz
Woofer
Woofer
5-1/4" titanium-laminate
6-1/2" titanium-laminate
cone w/rubber surround
cone w/rubber surround
Tweeter
Tweeter
1" titanium-laminate
1" titanium-laminate
dome, w/Elliptical Oblate
dome, w/Elliptical Oblate
Spheroidal™ waveguide
Spheroidal™ waveguide
and swivel mount
and swivel mount
Plate Size (W x H)
Plate Size (W x H)
191 x 254mm (7-1/2" x 10")
216 x 279mm (8-1/2" x 11")
Mounting Cutout Size (W x H)
Mounting Cutout Size (W x H)
156 x 221mm (6-1/8" x 8-11/16")
181 x 246mm (7-1/8" x 9-11/16")
Mounting Depth
Mounting Depth
95mm (3-3/4")
98mm (3-7/8")
Weight per Speaker
Weight per Speaker
1.8kg (4 lb)
2.3kg (5 lb)
All features and specifications are subject to
change without notice.
† The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
* Trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
OWNER'S GUIDE
P R O D U C T L I N E :
SOUNDPOINT
M O D E L S :
SP5, SP6, SP6C, SP6CS, SP8, SP8C
Combine the superior performance of traditional
DESIGN GOAL:
JBL loudspeakers with the convenience of in-wall installation.
Titanium-laminate-dome with swivel mount
TWEETER TYPE:
Titanium-laminate cone with rubber surround
WOOFER TYPE:
CROSSOVER NETWORK:
PROFESSIONAL REFERENCE:
SP6C
Frequency Response
40Hz– 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
80 watts
Impedance
8 ohms nominal
Sensitivity (2.83V/1m)
88dB
Crossover Frequency
2,600Hz
Woofer
6-1/2" titanium-laminate
cone w/rubber surround
Tweeter
1"
titanium-laminate
dome,
w/swivel mount
Plate Size (Diameter)
233mm (9-3/16")
Mounting Cutout Size (Dia.)
200mm (7-7/8")
Mounting Depth
108mm (4-1/4")
Weight per Speaker
2.0kg (4.5 lb)
We, Harman Consumer Group International
declare in own responsibility that the products described in this
owner's manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
SERIES
Straight-Line Signal Path
(SSP)
Studio Monitor
SP6CS
SP8
Frequency Response
Frequency Response
40Hz – 20kHz (–10dB)
30Hz – 20kHz (–10dB)
Recommended Maximum
Recommended Maximum
Amplifier Power †
Amplifier Power †
100 watts total (50WPC)
100 watts
Impedance
Impedance
8 ohms nominal per input
8 ohms nominal
Sensitivity (2.83V/1m)
Sensitivity (2.83V/1m)
88dB, both channels driven
89dB
Crossover Frequency
Crossover Frequency
2,600Hz
2,400Hz
Woofer
Woofer
6-1/2" titanium-laminate
8" titanium-laminate
cone w/rubber surround
cone w/rubber surround
Tweeters
Tweeter
Dual 3/4"
1" titanium-laminate
titanium-laminate
dome, w/Elliptical Oblate
domes,
Spheroidal™ waveguide
w/swivel mounts
and swivel mount
Plate Size (Diameter)
Plate Size (W x H)
233mm (9-3/16")
257 x 333mm (10-1/8" x 13-1/8" )
Mounting Cutout Size (Dia.)
Mounting Cutout Size (W x H)
200mm (7-7/8")
225 x 300mm (8-7/8" x 11-13/16")
Mounting Depth
Mounting Depth
108mm (4-1/4")
102mm (4")
Weight per Speaker
Weight per Speaker
1.8kg (4 lb)
3.5kg (7.8 lb)

Declaration of Conformity

2, route de Tours
72500 Chateau-du-Loir
France
Harman Consumer Group International
Chateau-du-Loir, France 9/04
PRO SOUND
COMES HOME
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
Europe: 2. Route de Tours, 72500 Château du Loir, France
www.jbl.com
For new-construction applications, be sure
NOTE:
to purchase the correct rough-in frame kit.
©2004 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International
Industries, Incorporated.
Part No.406-000-05033 9/04
SP8C
Frequency Response
32Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
100 watts
Impedance
8 ohms nominal
Sensitivity (2.83V/1m)
89dB
Crossover Frequency
2,400Hz
Woofer
8" titanium-laminate
cone w/rubber surround
Tweeter
1" titanium-
laminate
dome,
w/swivel mount
Plate Size (Diameter)
275mm (10-7/8")
Mounting Cutout Size (Dia.)
240mm (9-1/2")
Mounting Depth
108mm (4-1/4")
Weight per Speaker
2.5kg (5.6 lb)
Gary Mardell

Advertisement

Table of Contents
loading

This manual is also suitable for:

Soundpoint sp6csSoundpoint sp6Soundpoint sp8Soundpoint sp6cSoundpoint sp8c

Table of Contents