Timex Intelligent Quartz W273 Instructions Manual page 21

LINEAR CHRONOGRAPH
The watch provides a 4-hour split chronograph.
1. To start, press Button A (START/STOP). The 4th center
hand shows the seconds with 1/5 second resolution.
The linear hand shows the minutes, counting up to
thirty and repeating. The lower hand shows the total
time, including hours and minutes, with divisions every
ten minutes. The chronograph counts up to four hours
before stopping automatically.
2. To stop, press Button A (START/STOP) again. All hands
stop moving.
3. To reset the chronograph to zero position, press But-
ton B (SPLIT/RESET).
36
When the chronograph is reset, all hands move to zero
position. After another eight seconds, the watch resumes
normal display of the second time zone. While the
chronograph is running, you may take a split time. Press
Button B (SPLIT/RESET) and all hands will stop while the
chronograph continues to run. Press Button B (SPLIT/
RESET) again to resume the display of the running
chronograph elapsed time.
37