Carrier xpower blue II 42KCL109313G Service Manual page 34

C10 inverter series
Table of Contents

Advertisement

frequency limit are active and the same as that in cooling mode.
8.4.4.5 The outdoor fan operates the same as in cooling mode.
8.4.5 Forced operation function
8.4.5.1 Enter forced operation function:
When the machine is off, pressing the touch button will carry the machine to forced auto mode. If
pressing the button once again within 5 seconds, the machine will turn into forced cooling mode.
In forced auto, forced cooling or any other operation mode, pressing touch button will turn off the
machine.
8.4.5.2 In forced operation mode, all general protections and remote control are available.
8.4.5.3 Operation rules:
Forced cooling mode:
The compressor runs at F2 frequency and indoor fan runs as breeze. After running for 30 minutes. the
machine will turn to auto mode as 24
setting temperature.
Forced auto mode:
The action of forced auto mode is the same as normal auto mode with 24
setting temperature.
8.4.6 Timer function
8.4.6.1 Timing range is 24 hours.
8.4.6.2 Timer on. The machine will turn on automatically when reaching the setting time.
8.4.6.3 Timer off. The machine will turn off automatically when reaching the setting time.
8.4.6.4 Timer on/off. The machine will turn on automatically when reaching the setting "on" time, and
then turn off automatically when reaching the setting "off" time.
8.4.6.5 Timer off/on. The machine will turn off automatically when reaching the setting "off" time, and
then turn on automatically when reaching the setting "on" time.
8.4.6.6 The timer function will not change the AC current operation mode. Suppose AC is off now, it will
not start up firstly after setting the "timer off" function. And when reaching the setting time, the timer
LED will be off and the AC running mode has not been changed.
8.4.6.7 The setting time is relative time.
8.4.7 Sleep function mode
8.4.7.1 Operation time in sleep mode is 7 hours. After 7 hours the AC quits this mode and turns off.
8.4.7.2. Operation process in sleep mode is as follow:
℃ be lower than 30 ) every one hour, 2 hours later the
When cooling, the setting temperature rises 1
(
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents