C. Grate
Frequency: After each ash removal
By: Homeowner
Inspect grate for:
•
Warping or sagging 1-1/2 in. (38 mm) or more
•
Broken welds
•
Burn-through of grate bars
For safe operation, replace only with the approved grate
from Vermont Castings Group.
D. Glass Cleaning
Frequency: As necessary
By: Homeowner
Tools Needed: Vinegar or glass cleaner, soft towel
•
Clean glass with a non-abrasive glass cleaner. Use a
damp cloth dipped in wood ashes or a commercially
available oven cleaner. Remove any oven cleaner
residue with a glass cleaner or soap and water.
E. Ash Removal
Frequency: As necessary
By: Homeowner
Tools Needed: Covered metal container, metal
shovel, fireplace broom
WARNING! Risk of Fire! DO NOT remove ashes until
the fire is out and the fireplace is cold.
•
Ashes should be placed in metal container with tight
fitting lid.
•
The closed container of ashes should be placed
on a noncombustible floor or on the ground, well
away from all combustible materials, pending final
disposal.
•
If the ashes are disposed of by burial in soil or
otherwise locally dispersed, they should be retained
in the closed container until all cinders have
thoroughly cooled.
F. Refractory/Firebrick
Frequency:
By:
Tools Needed:
•
Inspect condition of brick. Replace if crumbly or
otherwise deteriorated, or if cracks exceed 1/4 in.
(6 mm).
16
VCG Royalton Series • BE36/BE42 Owner Manual • 4044-198 • Rev A • 02/18/15