PRESONUS RM32AI Owner's Manual page 35

3 Networking the RM-series Mixer
3.9 Setting Permissions
Access Codes
FOH: Gives the user of the selected device full access to all UC
•
Surface functions, making that device the RM control master.
• All Auxes: Allows the user of the selected device to make
channel fader adjustments that affect all aux mixes.
Aux 1-16: A single aux mix (or stereo linked pair) can be chosen to limit access by
•
the user of the selected device to channel fader levels for the specified aux mix.
• None: Disables control of the RM mixer by the selected device.
5. Click/tap in the Other field and:
• Select Ch Rename to allow a UC Surface user to remotely
change channel and bus scribble-strip labels, or
• Select None to prevent the user from editing these labels.
Typically, one iPad, laptop, or desktop computer is configured as front-of-house
(FOH), and all others, along with iPhones and iPod touches, are configured to control
aux mixes. However, you can configure more than one device to handle FOH.
Once a device running UC Surface has been set up with permissions other
than FOH, that device will be locked out of making changes to the RM mixer
settings, including additional permissions changes. In order to change
the access level for the device, you need to enter an access code on that
device. Access codes are unique for each device running UC Surface.
The default access code for UC Surface is 12345.
StudioLive™ RM-Series Mixers
Owner's Manual
31