PRESONUS RM32AI Owner's Manual page 20

3 Networking the RM-series Mixer
3.4 Wireless Control Setup
8. Click/tap the wireless connection icon near the top of the tab. The Network List
view appears, showing all of the wireless networks being seen by the RM mixer.
Note: Scanning for networks can take a little time. If you see a dialog that reads
"The mixer has limited or no Wi-Fi capability detected or is still scanning for
additional networks, " try closing and reopening the Global Settings view.
9. Click/tap the name of the wireless network you want to
use in the list of available wireless networks.
10. Enter a password at the prompt, if one is required.
11. Click/tap the Join button.
12. Close the Network List view; the name of the network you just joined should be
displayed next to the wireless connection icon. If it is not, you did not successfully
join the network and must try again or troubleshoot the network connections.
13. Quit UC Surface and shut down the RM mixer.
14. Remove the wired connection between the router and the RM mixer.
Your system is now configured to connect to the new wireless network.
StudioLive™ RM-Series Mixers
Owner's Manual
16