Table of Contents
Advertisement
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User's Guide
Figure 5-1. Management Console Screen
Once you have connected to the console port on the switch, you should see a window like that
pictured in Figure 5-1. If the screen appears but is blank, press "Control" and "R" (Ctrl+R)
simultaneously to refresh the screen. Use this screen to perform all the available management
functions.
User Interface
The command keys are displayed on the bottom of screen, move the cursor to the correct position
to change function setting. The command keys are described below:
Tab – move the cursor to the next item
Back Space – move the cursor to previous item
Space – toggle, select
Ctrl+r, Enter – screen refresh
Ctrl+d – all feature settings are reset the default values.
Ctrl+w – apply and configuration settings. Use this command to let the settings take effect. This will also
save the settings data to the EEPROM in the switch.
13
Advertisement
Table of Contents
