Power On; Power Failure - D-Link DES-1210G User Manual

DES-1210G Fast Ethernet/Gigabit Ethernet Switch User's Guide
Figure 2-3 Mount Switch in Rack

Power on

Plug one end of the AC power cord into the power connector of the switch and the other
end into the local power source outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This
blinking of the LED indicators represents a reset of the system.

Power Failure

As a precaution, in the event of a power failure, unplug the switch. When power is
resumed, plug the switch back in.
6