Step 2.1 - 3.5Mm Cord Analog Installation - TV Ears 5.0 User Manual

3.5mm Cord Analog Installation
Step 2.1
This step is an alternative to Step 2 on page 9. This step will
explain how to connect the TV Ears transmitter to your television,
satellite, or cable box using a 3.5mm analog audio cord.
• If you cannot get to the back of your TV, you can also use these
instructions to install the system to your cable or satellite box.
• If you connect the 3.5mm audio cord to the Headphone port on
your TV, your TV Ears will still function properly, but the sound to
your television speakers will be muted. The port is usually labeled
with an icon that looks like the following:
1
Plug one end of the 3.5mm audio cord into the "Audio Out"
port on the back of the television, satellite box, or cable
box.
2
Plug the other end of the audio cord into the port labeled
"Analog Audio In" on the back of the transmitter. The correct
port has a yellow border around it.
• Your TV's audio settings may be set to "variable" or "fixed". We
recommend that you set your audio settings to "fixed" for better
audio quality when using this installation option. If you want to be
able to control your TV volume level separate from your TV Ears
volume level, you will need to make sure your TV is set to "fixed".
Contact your TV manufacturer for assistance.
10
For assistance, call us at 866-611-9934
Analog Audio
3.5mm