Alternative Installation Method; Mm Cord Analog Installation - TV Ears Headphone System User Manual

ALTERNATIVE INSTALLATION METHOD

3.5mm Audio Cord Installation
This step is an alternative to Step 2 on page 12. This step will explain
how to connect the TV Ears transmitter to your television, satellite, or
cable box using a 3.5mm analog audio cord.
• If you connect the 3.5mm audio cord to the Headphone port on
your TV, your TV Ears will still function properly, but the sound to
your television speakers will be muted. The port is usually labeled
with an icon that looks like the following:
1.
Plug one end of the 3.5mm audio cord into the "Audio Out"
port on the back of the television, satellite box, or cable box.
2. Plug the other end of the
3.5mm Audio Cord into
the port labeled "Audio
In" on the side of the
transmitter. The correct
port has a "Green" border
around it.
• Your TV's audio settings may be set to "variable" or "fixed".
We recommend that you set your audio settings to "fixed" for
better audio quality when using this installation option. If you
want to be able to control your TV volume level separate from
your TV Ears volume level, you will need to make sure your TV
is set to "fixed". Contact your TV manufacturer for assistance.
Note: The headphones can be used to amplify and clarify audio from any
device equipped with a 3.5mm headphone jack; Such as iPad's/tablets,
smart phones, computers etc.
For assistance, call (866) 611-9934. See Page 19
13