Storing The Parking Position - Mercedes-Benz G-Class Operator's Manual

Mirrors
94
"Fold in mirrors when locking" function in the
on-board computer (
Make sure that the SmartKey is in position
X
1( page 139) in the ignition lock.
Y
Briefly press button :.
X
Folding the exterior mirrors in/out
automatically
If the "Fold in mirrors when locking" function
is activated in the on-board computer
( page 217):
Y
the exterior mirrors fold in automatically as
R
soon as you lock the vehicle from the
outside.
the exterior mirrors fold out again
R
automatically as soon as you unlock the
vehicle and then open the driver's or front-
passenger door.
Exterior mirror pushed out of position
Press button : repeatedly until you hear
X
the mirror engage in position.
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( page 93).
Y
Automatic anti-glare mirrors
G
WARNING
If incident light from headlamps is prevented
from striking the sensor in the rear-view
mirror, for instance, by luggage piled too high
in the vehicle, the mirror's automatic anti-
glare function will not operate.
Incident light could then blind you. This may
distract you from the traffic conditions and,
as a result, you may cause an accident.
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror.
page 217).
Y
i
The mirrors do not go into anti-glare mode
if reverse gear is engaged or if the interior
lighting is switched on.
Parking position for the exterior
mirror on the front-passenger side
Setting/storing the parking position
Using reverse gear
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position
2( page 139) in the ignition lock.
Y
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-