Operating The Climate Control Systems; Defrosting The Windshield - Mercedes-Benz G-Class Operator's Manual

Turn the SmartKey to position
X
2 ( page 139) in the ignition lock.
Y
Set the desired temperature.
X
To switch on: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow
are activated.
To deactivate: press the _ button.
X
or
Press the I or K button.
X
The indicator lamp in the à button goes
out.
Setting the temperature
You can set the temperature separately for
the driver's and front-passenger sides with
controls : or B( page 119).
Y
Turn the SmartKey to position
X
2 ( page 139) in the ignition lock.
Y
Set control : or B(
X
desired temperature.
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Setting the air distribution
Turn the SmartKey to position
X
2 ( page 139) in the ignition lock.
Y
Press the _ button repeatedly until the
X
desired symbol appears in the display.
P Directs the airflow through the center
vents
O Directs the airflow through the
footwell air vents
S Directs the airflow through the center
and footwell vents
¯ Directs air through the defroster vents
b Canada only: directs the airflow
through the defroster and center vents

Operating the climate control systems

page 119) to the
Y
a Directs air through the defroster and
footwell vents
_ Canada only: directs the airflow
through the defroster, center and side
air vents and the footwell
Setting the airflow
Turn the SmartKey to position
X
2 ( page 139) in the ignition lock.
Y
To increase: press the K button.
X
To reduce: press the I button.
X
i
The airflow from the rear-compartment
vents and the center vents is the same.
Switching the ZONE function on/off
To switch on: press the á button.
X
The indicator lamp in the á button lights
up.
i
The temperature setting for the driver's
side is not adopted for the front-passenger
side and the rear compartment. The
temperature for the front-passenger side
and the rear compartment must be set
separately.
To switch off: press button á.
X
The indicator lamp in the á button goes
out.
i
The temperature setting for the driver's
side is adopted for the front-passenger side
and the rear compartment.

Defrosting the windshield

You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
i
You should only select the defrosting
function until the windshield is clear again.
131
Z