Sleep Timer 47 - Magnavox MC132DMG Owner's Manual

MC132DMG/MC192DMG 3/22/02
Use the sleep timer to program the TV/VCR to shut off in a
certain amount of time.
1
Press the SLEEP/WAKE UP button (located on
the upper right corner of the remote).
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
>
WAKE UP
ON-TIME
2
Press the PLAY/o o button or the STOP/p p but-
ton to select SLEEP. Then press the
REW(ind)/s button or the F.FWD/B button
to select 30 MIN(utes), 60 MIN(utes), 90
MIN(utes), or 120 MIN(utes). (You cannot set
the sleep timer during a recording.)
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
>
WAKE UP
ON-TIME
3
Press the STATUS/EXIT button. The TV/VCR
will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the
seconds will count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10
seconds before the TV/VCR shuts itself off.
1:21 PM Page 47
OFF
30 MIN

Sleep Timer 47

POWER SLEEP/WAKE UP
PLAY
F.FWD
REW
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
ALT.CH
VOL.
SPEED MEMORY PAUSE/STILL
MUTE
REC/OTR TRACKING
Helpful Hints
• To cancel the sleep timer, press
the SLEEP/WAKE UP button.
Press the PLAY/o button or the
STOP/p button to select SLEEP,
then press the REW(ind)/s s but-
ton or the F.FWD/B B button to
select OFF. Press the
STATUS/EXIT button.
• To see how much time remains
before the TV/VCR shuts itself off,
press the SLEEP/WAKE UP button
once. If necessary, press the
PLAY/o button or the STOP/p
button to select SLEEP. The
remaining time will appear beside
SLEEP. To remove the display,
press the STATUS/EXIT button.
• If you start a recording after you
set the Sleep Timer, the Sleep
Timer will be cancelled.
1
2
3