Automatic Channel Setup - Magnavox MC132DMG Owner's Manual

MC132DMG/MC192DMG 3/22/02

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the
channels you receive when you turn it on for the first time,
you may set up channels again by following the steps below.
1
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/
ton to select PRIM. SETUP, then press the
F.FWD/B button.
PRIMARY SETUP
SELECT LANGUAGE
AUTO PROGRAMMING
>
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/
ton to select AUTO PROGRAMMING, then
press the F.FWD/B button. AUTO CH PRO-
GRAMMING ... will appear on the screen. The TV/VCR
distinguishes between TV channels and cable channels
automatically, and the TV/VCR will memorize its avail-
able channels.
4
Wait for a few minutes. When setup is complete,
CHANNELS ARE SET will appear on the screen.
Then the programming of the lowest channel number
will appear on the screen. Now, when you press the
o
CH(annel)
channels you receive. You can still select non-memo-
rized channels using the Number buttons.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START
1:21 PM Page 10
PRESS
B
button or the STOP/
[ON]
button or the STOP/
p
/ buttons, you will scan only through
FINISH
1
but-
1
4
7
SPEED
REC/OTR
but-
4
Wait for the TV/VCR to set up
channels.
• Line Input mode will always be
channel 00. You cannot delete it.
• You cannot select AUTO PRO-
GRAMMING at step 3 if you are
in Line Input mode.
2-3
POWER SLEEP/WAKE UP
PLAY
F.FWD
REW
STOP
STATUS/EXIT
2 3
CH.
5 6
8 9
0
ALT.CH
VOL.
MEMORY PAUSE/STILL
MUTE
TRACKING
Helpful Hints