Rerecording (Tape Duplication) 31 - Magnavox MC132DMG Owner's Manual

MC132DMG/MC192DMG 3/22/02
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
VIDEO
1
Make the connections shown above, using
audio and video cables (not supplied). Connect
the source unit (VCR or camcorder) to a
power source after connections are made.
2
The source unit will play your tape. Insert a prere-
corded tape in the source unit. If playback begins,
press the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank
tape in the TV/VCR. Make sure the tape's record
tab is intact. The TV/VCR power will turn on auto-
matically.
4
Point the TV/VCR remote control at the
TV/VCR. Press Number buttons 0, 0 so that
A/V IN appears on the screen.
The TV/VCR is now in Line Input mode.
5
Point the TV/VCR remote control at the
TV/VCR. Press the SPEED button until the
desired tape speed (SP or SLP) appears on the
screen.
6
Press the PLAY button on the source unit and
the REC(ord)/OTR button on your TV/VCR at
the same time. Copying will begin.
7
To stop copying, press the STOP/EJECT but-
ton on the TV/VCR, then stop the tape on the
source unit (VCR or camcorder).
1:21 PM Page 31
Audio Cable from
AUDIO OUT to AUDIO In
AUDIO
OUT
IN
Video Cable from
VIDEO OUT to VIDEO In

Rerecording (Tape Duplication) 31

• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment
may operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Programs that are copyright
protected may not record clearly.
VIDEO AUDIO
POWER
AUDIO and VIDEO In
Jacks on TV/VCR
Helpful Hints