Erasing Selected Caller Information; Erasing All Caller Information; Caller Id Number Auto Edit Feature - Panasonic KX-TGF350 Operating Instructions Manual

Digital corded/cordless answering system

Hide thumbs Also See for KX-TGF350:

Operating instructions manual (68 pages)

Operating instructions manual (68 pages)

Operating instructions manual (68 pages)

Table Of Contents

Table of Contents

Caller ID Service

Note for handset and base unit:

R If the entry has already been viewed or

answered, " " is displayed.

R In step 1, you can also access the caller list as

follows:

Base unit:

MCALL LOGN a MbN: "Incoming call" a

MSELECTN

Editing a caller's phone number

You can edit a phone number in the caller list by

removing its area code and/or the long distance

code "1".

Handset

MCN CID

MbN: Select the desired entry. a MMENUN

MbN: "Edit" a MSELECTN

Press MEDITN repeatedly until the phone

number is shown in the desired format.

Base unit

MCIDN

MbN: Select the desired entry.

Press MEDITN repeatedly until the phone

number is shown in the desired format.

Lift the corded handset.

Caller ID number auto edit feature

Handset / Base unit

Once you call back an edited number, the unit

which was used to call back remembers the area

code and format of the edited number. The next

time someone calls from the same area code,

caller information is customized by the unit as

follows:

– When the call is being received, the Caller ID

number is displayed in the same format as the

edited number.

– After the call has ended, the caller's phone

number is displayed in the same format as the

edited number, when reviewed from the caller

list.

For example, you can use this feature to set the

unit to ignore the area code of callers in your area,

so that you can call these local numbers using

caller information without dialing the area code.

TGF35x(en)_1205_ver041.pdf

For assistance, please visit www.panasonic.com/support

To activate this feature, you must edit an entry in

the caller list, then call that number. After that,

phone numbers from that caller's area code are

edited automatically.

This feature can be set for each unit (page 30).

The default setting is "On".

Note:

R Phone numbers from the 4 most recently edited

area codes are automatically edited.