Product Mounting Diagram; Control Panel Description - Chauvet Rogue R2 Quick Reference Manual

Rogue™ R2 Beam QRG
DMX Linking
DMX Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
The Rogue™ R2 Beam will work with a DMX controller using a 3- or 5-pin DMX
data connection. A DMX Primer is available from
The Rogue™ R2 Beam uses a 3- or 5-pin DMX data connection for its DMX
personalities: 15CH and 18CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
Before mounting this product, read the
points per product. Make sure the mounting clamps (such as CLP-15 from
CHAUVET®) are capable of supporting the weight of the product. For our
CHAUVET® line of mounting clamps, go to
plates-accessories-clamps/.
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Safety Notes. Use at least two mounting
Mounting Clamp
Omega Bracket
Safety Cable
Function
4
www.chauvetprofessional.com
trusst.com/productcategory/base-
Floor Mounting
EN