Bridging Features; Wireless Lan Features; System Requirements; For Wireless Clients - Mercury KOB WL530 User Manual

Broadband Wireless Router (AP) User Manual

Bridging Features

Supports self-learning bridge specified in IEEE 802.1D Transparent Bridging
Transparent Bridging between 4-port 10/100 Mb Ethernet switch and 802.11b Wireless
LAN interface
QoS Supports IEEE 802.1p tag for prioritize layer 2 traffic on 4-port Ethernet Switch
Port based priority that can prioritize specific port for multimedia streaming
applications
Security Features
PAP (RFC1334), CHAP (RFC1994) for PPPoE session
Wireless support WEP (Wired Equivalent Privacy) uses RC4 with 40/64 and 128 bit
key length
Support IP packets filtering based on IP address, Port number, Protocol type and TCP
code

Wireless LAN Features

Fully compatible to 802.11b standard, allowing up to 11Mbps wireless rate with
distance up to 300 feet / 90 meters
The 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology is exploited.
Seamless roaming within wireless LAN infrastructure
Low power consumption via efficient power management
Configuration and Management
Configurable through Web Browser
HTTP firmware upgrades via Web browser directly
Support DHCP Server function for IP distribution to local network users
QoS setting allows prioritizing one of 4 switch ports. The prioritized port could also be
changed
Event Logging, also provide different level of event display

System Requirements

For Wireless Clients

- System OS (Windows 98/2000/NT/ME/XP)
-
Wireless card
-
Wireless card driver

For Ethernet (wired) Clients

System OS (Windows 98/2000/NT/ME/XP)
10/100Base-T NIC
10/100Base-T (UTP) network cable.
Hub
Note
xDSL/ATU-R service registered from your Internet service provider (ISP) is required
for Internet access.
8