Routing; Ip Dynamic Routing - Mercury KOB WL530 User Manual

Broadband Wireless Router (AP) User Manual

Routing

IP Dynamic Routing

Routing Information Protocol (RIP) is utilized as a means of exchanging routing information
between routers. It helps the routers to determine optimal routes. This page allows you to
enable/disable this function.
By default, RIP is disabled with Disable selected. You are allowed to enable RIP over the
LAN/WAN interface. Upon each interface, you can customize the RIP on Receive Mode and
Transmit Mode respectively.
Receive Mode: It incorporates the RIP information when receiving the RIP packets.
Transmit Mode: It broadcasts the routing table.
RIP Version: When enabling RIP, you can select the RIP version from RIPv1, RIPv2 or both
(RIPv1 and RIPv2).
Disable RIP: To disable RIP, just select Disable from the drop-down list.
30