Table of Contents
Advertisement
Web Configuration Overview
Using the Web-Based Manager
Once your host PC is properly configured as described in previous chapters, please proceed as
follows:
1. Start your web browser and type the private IP address of the Broadband Wireless Router (AP)
in the URL field: 192.168.0.1.
2. After connecting to the device, you will be prompted to enter username and password. By
default, both values are admin (small letters).
If you login successfully, the main page of BROADBAND WIRELESS ROUTER (AP)
appears. From now on the Broadband Wireless Router (AP) acts as a web server sending
HTML pages/forms on your request. You can fill out these pages/forms and apply them to the
Broadband Wireless Router (AP).
Outline of Web Manager
The home page of the BROADBAND WIRELESS ROUTER (AP) - CONTROL PANEL
is composed of 3 areas:
Title: It indicates the title of this management interface.
Main Menu: It displays a list of menu organized under three headings: Basic, Advanced,
system.
Basic: It displays the Basic Configuration page of the Broadband Wireless Router
(AP).
Advanced: Includes advanced settings for LAN Setting, WEP, Routing, Forwarding,
DMZ, UPnP and QoS.
System: Allows you to perform the management tasks and view the status and log fo
the device.
Main Window: It is the current workspace of the web management, containing
configuration or status information.
To Have the New Settings Take Effect
The Broadband Wireless Router (AP) uses the following mechanism to enable new settings:
1. Apply button.
When Apply is clicked, your customizations will only be stored to the DRAM. If you do not execute Save &
Reset, the customizations will not take effective next time your reboot the Broadband Wireless Router (AP).
2. Save & Reset button.
When Save is clicked, your customizations will be saved to the flash memory. After clicking Reset, your
customizations take effect.
21
Advertisement
Table of Contents
