Table of Contents
Advertisement
Broadband Wireless Router (AP) User Manual
TCP/IP Configuration
By default, the Broadband Wireless Router (AP) operates as a DHCP server for the client PCs
on the LAN. In order to access the Internet through the router, each host on your network
must have TCP/IP installed and set up to obtain dynamic IP addresses. The following
describes the procedures for client PCs to get IP addresses:
For Windows 98
Step 1
Click on the Start menu, point to Settings and click on Control Panel.
Step 2
Double-click the Network icon.
Step 3
The Network window appears. On the Configuration tab, check out the list of
installed network components.
Option 1: If you have no TCP/IP protocol, click Add.
Option 2: If you have TCP/IP protocol, go to Step 6.
Step 4
Highlight Protocol and click Add.
Step 5
On the left side of the windows, highlight Microsoft and then select TCP/IP on the
right side. Then click OK.
Step 6
When returning to Network window, highlight TCP/IP protocol for your NIC and
click Properties.
16
Advertisement
Table of Contents
