Canon MG6800 Series Online Manual page 496

• If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a single-
sided copy.
When checking orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you
can check the orientation.
A. Tap to rotate the original by 180 degrees.
B. Tap to start scanning the original.
C. Tap to rescan the original.
When scanning is finished:
The screen below appears after scanning each sheet of original.
A. Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass and tap Scan.
B. Tap to start copying the original already scanned.
Note
• You can add the copying job while printing.
Adding Copying Job (Reserve copy)
496