Changing The Wiper Blades; Changing The Engine Air Filter - Ford SHELBY GT350 MUSTANG Supplement Manual

Add prediluted engine coolant meeting the
Ford specification. See Capacities and
Specifications for more information.
Whenever coolant has been added, the
coolant level in the coolant reservoir
should be checked the next few times you
drive the vehicle. If necessary, add enough
prediluted coolant to bring the coolant
level to the proper level.
Coolant Refill Procedure
The following procedure should be used
when refilling the cooling system after it
has been drained or become extremely
low.
1. Remove the pressure relief cap from
the coolant reservoir as previously
outlined.
2. Slowly add prediluted coolant to the
coolant reservoir until the coolant level
is between the MIN and MAX marks on
the reservoir.
3. Reinstall the pressure relief cap.
4. Start and idle the engine until the upper
radiator hose is warm (this indicates
the thermostat is open and coolant is
flowing through the entire system).
5. Shut the engine off and let it cool.
6. Remove the pressure relief cap from
the coolant reservoir as previously
outlined.
7. Add prediluted coolant to the coolant
reservoir until the coolant level is
between the MIN and MAX marks on
the reservoir.
8. Reinstall the pressure relief cap.
9. Check the coolant level in the reservoir
before you drive your vehicle the next
few times (with the engine cool).
10. If necessary, add prediluted coolant
to the coolant reservoir until the
coolant level is between the MIN and
MAX marks on the reservoir.
Mustang (CZG) United States of America, Vehicles With: SVT Performance Package, enUSA, First Printing
Maintenance
Whenever coolant has been added, the
coolant level in the coolant reservoir
should be checked the next few times you
drive the vehicle. If necessary, add
prediluted coolant to bring the coolant
level to the proper level.
If you have to add more than 1.0 quart (1.0
liter) of coolant per month, have your
dealer check the cooling system. Your
cooling system may have a leak. Operating
an engine with a low level of coolant can
result in engine overheating and possible
engine damage.
CHANGING THE WIPER
BLADES
To service the windshield wipers, we
recommend the following for easier access
to the wiper blades.
1. Switch the ignition to accessory mode.
2. Switch the wipers on and switch the
ignition off when the wiper blades are
in the middle of the windshield.
3. Service the wiper blades. See the
Changing Wiper Blades section in the
Mustang Owner's Manual for more
information.
4. Switch the ignition to accessory mode
and switch the wipers off.
5. Switch the ignition off.
CHANGING THE ENGINE AIR
FILTER
To reduce the risk of vehicle damage
or personal burn injuries, do not start
your engine with the air cleaner
removed and do not remove it while the
engine is running.
38
WARNING