Planning A Route To A Poi Using Search - TomTom GO Reference Manual

5. Select the city in the left-hand column.
The city name is shown in the right side of the search input box, and the city center POI is
shown below in the right-hand column.
6. Select the city center POI.
The city center location is shown on the map.
7. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as you
start driving, the
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the
time of arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route to a POI using search

Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to a POI type or a specific POI using search, do the following:
1. Select the Main Menu button to open the Main Menu.
guidance view is shown automatically.
that you have already planned.
My Routes.
arrival information
50
panel. The estimated