Planning A Route To A Poi Using Online Search - TomTom BRIDGE User Manual

Tip: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select a POI type or an individual POI. If you selected a POI type, select a POI.
The location is shown on the map.
6. To see more information about the POI, select the POI on the map and then select the pop-up
menu button. Select More Information on the pop-up menu.
You see more information about the POI such as the phone number, full address and email.
7. To plan a route to this destination, select Drive/Ride depending on which device you are
using.
A route is planned and then guidance to your destination begins. As soon as you start driving,
the guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the
time of arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route to a POI using online search

QUICK SEARCH ONLY
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
Note: Searching online is only available on connected devices. To search online on your
TomTom BRIDGE, you must be
If you did a POI search
Places online. To find POIs by searching online, do the following:
1. Search for a POI
that you have already planned.
My Routes.
connected to TomTom
but could not find the POI you were looking for, you can search TomTom
using Search in the Main Menu.
arrival information
services.
64
panel. The estimated