Trigger Out - Marantz SR5010 Owner's Manual

Contents Connections

Trigger Out

Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see "DC OUT
jack" (v p. 66).
n When setting for zone (MAIN ZONE/ZONE2)
Trigger out is activated through linkage to the power of the zone set to
"On".
n When setting for input source
Trigger out is activated through linkage to the power of the zone set to
"On".
0 It is valid for the zone, which is set to "On" and "When setting for zone".
On: Activate trigger on this mode.
– – –: Do not activate trigger on this mode.
Front panel Display
Playback Settings
Front Display
Makes settings related to the display on this unit.
o Dimmer
Adjust the display brightness of this unit.
Bright
(Default):
Dim:
Dark:
Off:
0 You can also adjust the display by pressing DIMMER on the main unit.
218
Rear panel
Tips
Normal display brightness.
Reduced display brightness.
Very low display brightness.
Turns the display off.
Remote Index
Appendix