Tuning In By Entering The Frequency (Direct Tune) - Marantz SR5010 Owner's Manual

Contents Connections
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is "Tuner".
The option menu screen is displayed.
2
Use ui to select "Direct Tune", then press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use ui to select the number, then press p.
If o is pressed, the immediately preceding input is cancelled.
0
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Front panel Display
Playback Settings
RDS search
RDS is a broadcasting service which allows a station to send additional
information along with the regular radio program signal.
Use this function to automatically tune to FM stations that provide the RDS
service.
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press OPTION when the input source is "Tuner".
The option menu screen is displayed.
2
Use ui to select "RDS Search", then press ENTER.
3
Press ENTER.
The search for RDS stations begins automatically.
0 If you use o p within 5 seconds after the broadcast station name is shown on the
display, you can search for a different station.
87
Rear panel
Tips
Remote Index
Appendix