Zone Rename; Auto Standby; Trigger Out; Front Display - Marantz SR6007 Owner's Manual

Zone Rename

Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
• Up to 10 characters can be input.
• For character input, see page 108.

Trigger Out

Selects when to activate trigger out.
For details about how to connect the DC OUT jacks, see "DC OUT jack" (vpage 94).
n When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set to "On".
n When setting for input source
Activate trigger out when the input source set to "On" is selected.
Active for the zone set to "On" with "When setting for zone".
• On : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
DVD
Setting details
Setting details

Auto Standby

When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.

Front Display

Adjust the display brightness of this unit.
Setting items
Display On : Display is always on.
Auto OFF : Display is off except when showing the status display.
Off : Display is always off.
This can also be set by pressing
Each time
below.
NOTE
When "Display" is set to "Off", the display turns off and appears as if
there is no electricity.
136
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DISPLAY
on the main unit.
DISPLAY
is pressed, the setting is changed as shown
On Auto Off
Off
General