Marantz SR5013 Service Manual
  1. Manuals
  2. Brands
  3. Marantz Manuals
  4. Receiver
  5. SR5013
  6. Service manual

Marantz SR5013 Service Manual

Av surround receiver
Hide thumbs Also See for SR5013:
Table of Contents

Advertisement

Quick Links

Download this manual
AV Surround Receiver
SR5013
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual when referring to the operating instructions without fail.
• Some illustrations used in this service manual are slightly different from the actual product.
Service Manual
Click here!
On-line service parts list
http://dmedia.dmglobal.com/Document/DocumentDetails/24549
ONLINE PARTS LIST
(P5)
WEB owner's manual
NA:
http://manuals.marantz.com/SR5013/NA/EN/index.php
EU:
http://manuals.marantz.com/SR5013/EU/EN/index.php
AP:
http://manuals.marantz.com/SR5013/AP/ZH/index.php
Upload is planned for the time of a future press release.
BEFORE SERVICING THIS UNIT
ELECTRICAL
MECHANICAL
REPAIR INFORMATION
UPDATING
Confidential
Ver. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR5013 and is the answer not in the manual?

Questions and answers

Peter Incao
May 19, 2025

my front panel display is off. I tried the hard dimmer button in the front and the web page control. Is there another trick I can try?

0

Subscribe to Our Youtube Channel

Related Manuals for Marantz SR5013

Summary of Contents for Marantz SR5013

  • Page 1 Service Manual Ver. 1 AV Surround Receiver SR5013 Click here! On-line service parts list http://dmedia.dmglobal.com/Document/DocumentDetails/24549 ONLINE PARTS LIST (P5) WEB owner’s manual http://manuals.marantz.com/SR5013/NA/EN/index.php http://manuals.marantz.com/SR5013/EU/EN/index.php http://manuals.marantz.com/SR5013/AP/ZH/index.php Upload is planned for the time of a future press release. BEFORE SERVICING THIS UNIT...
  • Page 2 BEFORE SERVICING THIS UNIT SAFETY PRECAUTIONS NOTE FOR SCHEMATIC DIAGRAM HANDLING THE SEMICONDUCTOR AND OPTICS ONLINE PARTS LIST Accessing the Parts List Searching Part Numbers or Ref. Numbers NOTE FOR PARTS LIST SERIAL NUMBER Serial Number Organization SKU Code of this Unit POST-SERVICE PRECAUTIONS Initializing this Unit JIG FOR SERVICING...

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS The following items should be checked for continued protection of the customer and the service technician. Leakage current check Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chas- sis to either side of the power cord is less than 460 kohms, the set is defective.

  • Page 4: Note For Schematic Diagram

    NOTE FOR SCHEMATIC DIAGRAM WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer. CAUTION: Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check.

  • Page 5: Note For Parts List

    ONLINE PARTS LIST Accessing the Parts List Searching Part Numbers or Ref. Numbers (1) Access from the Service Manual You can search a Parts List for part numbers or Ref. numbers. ・ Click the URL link on the cover of the service manual. (1) Enter the part number or Ref.
  • Page 6 The 14-digit serial number that contains the code of the manufacturing plant and the manufacturing date. 14 digits Factory Manufactured Cumulative Year, month code code serial number The last Month 2digit of year (01 ～ 12) SKU Code of this Unit Product SKU SKU Code SR5013/U1B SR5013/N1B SR5013/N1SG SR5013/K1B...

  • Page 7: Initializing This Unit

    POST-SERVICE PRECAUTIONS Initializing this Unit Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the digital PCB. 1. Press the power button to turn off the power. 2. While holding down buttons "TUNER PRESET CH -" and "TUNER PRESET CH +" simultaneously, press the power button to turn on the power.

  • Page 8: Schematic Diagrams

    ELECTRICAL SCHEMATIC DIAGRAMS PRINTED CIRCUIT BOARDS SCH01 TMDS SW DIGITAL, F HDMI SCH02 ADV7180 INPUT, VIDEO, FRONT CNT SCH03 VIDEO PLD SCH04 HDMI SW1 MAIN, AUDIO IN, RS CNT, GUIDE L, HS TOP GUIDE, FH GUIDE SCH05 HDMI SW2 FRONT, USB, HDAM CNT, HP, TOP GUIDE SCH06 NET PHY PREOU, RS232C, SMPS, HDAM SCH07 DIGITAL CNT...
  • Page 9 SCHEMATIC DIAGRAMS SCH01 TMDS SW HDMI SW TMDS261B DV5V DV3.3V FROM D.SUPPLY DV1.8V TO 0A DGND DV1.8V TO A.PLD DV3.3V TO 1A L1131 CB05YTYH221-2012 C2238 47/6.3(MVG) R2202 C2233 4700N-K-1608 R2203 P1_C- P1_C+ P1_D0- HDMI SW1 P1_D0+ SW_SDA P1_D1- TO CPU SW_SCL P1_D1+ TO 4A...
  • Page 10 SCH02 ADV7180 ADV7180 L1023 CB C2518T220M L1022 CB C2518T220M L1021 CB05YTYH221-2012 FROM DV1.8V L1020 CB05YTYH221-2012 D.SUPPLY DV3.3V X1019 28.63636MHz(FA-238,7P) DGND TO 6A C2350 10N-K C2409 C2406 7P-D 7P-D C2343 R2251 1K69-F 82N-K R2252 OPEN R2250 R2261 R2310 C2345 100N-K DEC_PCK. DECIN_V.
  • Page 11 SCH03 VIDEO PLD TO 0B TO 1B TO A9 TO 2B VIDEO PLD FROM NET PHY ADV7180 DIR/A.PLD PO8KI_HSYNC. PO8KI_DE. PO8KI_PCK. PO8KI_VSYNC. PO8KI_Y11/R7. PO8KI_Y10/R6. PO8KI_Y7/R3. PO8KI_Y6/R2. PO8KI_Y9/R5. PO8KI_Y8/R4. PO8KI_Y5/R1. PO8KI_Y4/R0. PO8KI_Y3/G7. NETGUI_VS. DEC_D3. ADV8003 PO8KI_Y2/G6. NETGUI_DE. DEC_D2. PO8KI_C11/G3. NETGUI_R0. NETGUI_R0 DEC_D2 DEC_D1.
  • Page 12 SCH04 HDMI SW1 HDMI SW1 N1000 N1000 6232-23P R1000 HPD8 HPDF RXF_DDCDA DDCA_SDA DDCA_SCL RXF_DDCCL HDMI5V RXF_5V STBY5V FROM CEC5V CEC5V_1 D.SUPPLY CEC3.3V CEC3.3V L1000 CB05YTYH221-2012 CEC1.1V1 CEC3.3V L1016 TO 5B DGND DGND CB05YTYH221-2012 DGND RX_2+ RX_2- RXF_2+ DGND RX_1+ RXF_2- RX_1- RXF_1+...
  • Page 13 SCH05 HDMI SW2 HDMI SW2 N1004 A111989-A-01-T FLNG R1105 RX4_5V HP_DET Q1009 RT1N141C HPD4 DDC_SDA Q1010 FROM RT1N441C DDC_SCK D.SUPPLY R1107 CEC3.3V RX4_DDCDA L1007 CB05YTYH221-2012 CEC1.1V2 CE_REMOTE R1108 RX4_DDCCL L1019 TXC- CB05YTYH221-2012 DGND TO 0C RX4_C- TXC_SHLD TXC+ RX4_C+ TX0- RX4_0- TX0_SHLD TX0+...
  • Page 14 SCH06 NET PHY TO 4C TO 5C NET PHY FROM TO CPU DIGITAL_CNT NET3.3V LEGO5V FROM D.SUPPLY NET_I2S2_DOUT NET_I2S2_BCKIN NET_I2S2_DIN TO 2D NET_I2S2_LRCKIN R1297 DGND NET_I2S0_DOUT. R1298 NET_I2S_BCLKOUT. NET_TDM_DOUT R1299 NET_I2S_LRCKOUT. NET_TDM_BCKIN NET_TDM_FSIN C1190 100N-K C1187 100N-K R1207 R1208 NETGUI_VS. C1177 10N-K NETGUI_DE.
  • Page 15 SCH07 DIGITAL CNT TO 3D DIGITAL CNT TO D.SUPPLY C1312 C1311 N1014 OPEN OPEN N1014 TO CP4201 C125Z2-23 DAC_FL+ DAC_FL- DAGND DAGND DAC_FR- DAC_FR+ DAGND DAGND DAC_C+ CEN+ CEN- DAC_C- DAGND DAGND DAC_SW- N1039 DAC_SW+ INPUT DAGND DAGND N1039 C125Z2-25 DAC_SL+ DA+5V DAC_SL-...
  • Page 16 SCH08 CPU LEVEL CHG CPU LEVEL CHG TO D5 TO DIGITAL CNT FROM REMOTE3.3V SWM3.3V D.SUPPLY M3.3V DGND TO 7D SWM3.3V R1366 DC_PROT R1343 R1379 R1385 DGND 14 13 12 11 10 9 TO CPU TO 8D GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL AUDIO...
  • Page 17 CURRENT DET USB0_DM C1353 100N-K AMPSIG_DET AMPSIGDET VCC_USB R2182 AEXP_DATA R1524 MODE AEXP DATA 33*4(AR) KEY3 KEY3 174:VREFH0 AEXP CLK AEXP_CLK SR5013/U1B OPEN 175:AVCC0 U1061 U1062 KEY2 KEY2 AEXP OE AEXP_OE 176:NC/COMP_DET CD4094BPWR CD4094BPWR OPEN SR5013/N1B KEY1 KEY1 AEXP STB AEXP_STB...
  • Page 18 SCH10 ADV8003 ADV8003 DV5V FROM DV3.3V D.SUPPLY DV1.8V DGND TO 7E DVDD_TX AVDD3_1_TX PVDD_TX PVDD3_TX PVDD5_TX AVDD2_TX L1041 L1038 L1039 L1040 L1042 L1043 CB05YTYH221-2012 CB05YTYH101-2012 CB05YTYH221-2012 CB05YTYH221-2012 CB05YTYH221-2012 CB05YTYH221-2012 TX1_C- TX1_C- TX1_C+ TX1_C+ TX1_0- TX1_0- TX1_0+ TX1_0+ TO HDMI TX TX1_1- TX1_1- DDR_1.8V...
  • Page 19 SCH11 ADV8003 DDR ADV8003 DDR TO E9 TO F0 TO F1 ADV8003 ADV8003 ADV8003 U1028 A3R12E40DBF-8E(512Mb) U1029 A3R12E40DBF-8E(512Mb) DDR2 DDR1 DDR_1.8V DDR_1.8V DGND DGND DR_TXDQSB1 DDR_1.8V DDR_1.8V DGND DGND DR_TXDQSB3 DDR_1.8V DR_TXDQ14 DGND DR_TXDM1 DR_TXDQS1 DGND DR_TXDQ15 DR_TXDQ30 DGND DR_TXDM3 DR_TXDQS3 DGND DR_TXDQ31...
  • Page 20 SCH12 D.SUPPLY D5V. CEC3.3V M3.3V D3.3V2 SWM3.3V DA1.0V REMOTE3.3V DV1.8V NET3.3V DA3.3V DV3.3V D.SUPPLY DGND DGND DGND L1054 CB05YTYH221-2012 D5V. L1055 CB05YTYH221-2012 L1056 CB05YTYH221-2012 M3.3V N1033 HDMI TX L1138 R1947 OPEN 1.5A N1033 HSFE5040-2.2UH 0-2012 A2505-WV06 6P L1112 R1946 OPEN CEC1.1V CEC1.1V R1812...
  • Page 21 SCH13 HDMI TX HDMI TX CEC5V_2 CEC5V_1 FROM CEC3.3V D.SUPPLY CEC1.1V DGND VDD33IO L1115 TO F2 CB05YTYH221-2012 N1030 A111989-A-01-T FLNG AVDDH33 L1082 CB05YTYH221-2012 AVDD11 L1083 CB05YTYH221-2012 P0TX0_2+ TX2+ L1116 R1984 TX2 SHIELD 0*2(AR) OPEN TX2- P0TX0_2- TX1+ P0TX0_1+ R1985 L1117 TX1 SHIELD 0*2(AR) OPEN...
  • Page 22 SCH14 DIR A.PLD TO B9 TO C3 TO F4 TO B2 TO C6 DIR/A.PLD FROM NET PHY HDMI TX VIDEO PLD FROM HDMI SW1 FROM HDMI SW2 TO C7 TO E4 FROM NET PHY TO CPU DIR input R2117 Q2204 RT1N141C CH1:D-DATA R2110...
  • Page 23 SCH15 DSP TO G0 TO F6 TO E2 TO DIR/A.PLD TO CPU N1034 OPEN DSP1CS DSP1MISO DSP1MOSI DSP1CLK DGND DA3.3V L1129 CB05YTYH221-2012 L1130 CB05YTYH221-2012 DSP1MISO DSP1CLK R2181 10K*4(AR) C1429 1N-K U1023 C1430 1N-K W9864G6KH-5 C1432 100N-K C1434 1N-K R1780 R1775 SD_D0 DQ15 SD_D15...
  • Page 24 SCH16 MAIN DAC TO E6 TO F8 TO F5 TO F9 TO E5 TO F7 MAIN DAC FROM FROM FROM FROM FROM FROM DIR/A.PLD DIR/A.PLD DIR/A.PLD DIR/A.PLD DA+5V ADIN_VDCOM A/DIN_R DAGND A/DIN_L DAGND C2147 100N-K-1608 DACRTNGND C2149 100N-K-1608 AD_VDCOM ADIN_LEGO_L DAGND ADIN_LEGO_R DA+5V...
  • Page 25 BKT5000 BKT5001 C125Z2-09 BKT_M3 BKT_M3 SR ONLY CN4006 C125Z2-11 DA_+5V * MODEL/AREA OPTION MODEL AVRS940H AVRX2500H SR5013 AREA E2/E1C/K U / N / K OPTION A OPTION B OPTION C OPTION D A_-8V OPTION E A_+8V CN4205 TO CP5604 M3.3V...
  • Page 26 3.9K-F (CH)680P-J C2140 R2006 4.7K-F R2007 47K-F A_+8V * MODEL/AREA OPTION U1047:B NJM8080G R2010 3.9K-F MODEL AVRS940H AVRX2500H SR5013 R2012 AREA E2/E1C/K U / N / K R2011 R2014 DA_SR. OPTION A C4238 OPTION B C2146 100/16(KR3) R2013 (CH)3900P-J 3.9K-F...

  • Page 27: Video Part

    SCH19 VIDEO VIDEO PART VIDEO_F/CNT 1/3 JACK5000 CVBS OUT Y/V. C5033 OPEN CVBS INPUT SW NJM2595M INPUT OUT PUT AVR_S940/X2500 SR5013 SW4 SW5 MUTE MUTE VIN 3 CBL/SAT VIDEO_F/CNT 2/3 F4 CHASSIS VIN 4 Blu-ray VIN 2 NOT USED V.AUX...
  • Page 28 HDMI_DIGITAL CNT C4 TO N1039 CP3401 C125Z1-25 CP5000 FUSE F5006,F5007,F5008,F5009 F5005 AVR S940_X2500 OPEN T1.6AL/250V CP5000 C125Z1-21,25 SR5013 ONLY F5005A F5005B F5005 TRG_15V_A T1.25AL 250V C5046 AVR ONLY (21P) OPEN SR ONLY 25P MAIN TRANS TAP TO CN5000 CP5003 F5006 A2505-WR08 T1.6AL 250V...
  • Page 29 SCH21 RC5 VIDEO_F/CNT 3/3 RC-5 PART SR ONLY R5718 R5719 Q5630 Q5625 RT1P141C Q5629 RT1P141C C5662 C5663 RT1N141C OPEN 4700N-K D5617 R5710 OPEN(2W) Q5626 LBAS16HT1G RT1P141C R5711 OPEN(2W) D5V(MX) M/DGND M3.3V KILLIR RC_OUT JACK5005 FRONT_IRIN RC_IN R5720 R5736 TO G2 Q5628 C5678 R5740...
  • Page 30 SCH22 AMP1 SR5013 AMP SCH 61.5V 55.6V R703 R401 ZD401 R402 R403 OPEN R406 ZJ5.1A 100K 270(1) R405 R404 C401 270(1) CP501 DHPTF1608-115T C402 100N-K Q401 A2001-WR02 D401 OPEN KTA1024Y 0.6V C403 R407 1N4148 C404 10N-K Q403 1.1V OPEN Q402...
  • Page 31 SCH23 AMP2 TO G3 TO G4 PAGE 2 PAGE 2 AMP B’D 1/2_A10 AMP B’D 1/2_M10 R706 R531 ZD410 R532 R533 R534 ZJ5.1A 100K 270(1) R535 270(1) OPEN R537 CP504 C449 C450 Q437 A2001-WR02 DHPTF1608-115T D419 OPEN 100N-K KTA1024Y Q439 1N4148 C452 OPEN KST5401MTF...
  • Page 32 D4004 C4032 100N-K JZC-42F 47N-100V(PEF) LBAS16HT1G C4033 OPEN L4006 * MODEL / AREA OPTION SP-2507 C4034 OPEN MODEL AVR-S940H AVR-X2500H AVR-X3500H SR5013 R4015 C4035 100N-K AREA E3/E1C E2/K E3 / E1C 10(2) C4028 C4036 OPEN R4014 OPEN 10000uF/69V 12000uF/71V 12000uF/71V...
  • Page 33 SCH25 TUNER REG SPK PART A8 MAIN 2/3 TO G5 TUNER / REG PART X2500H/SR5013 : VIDEO_F/CNT 2/3 _ J9 X3500H : VIDEO_F/CNT 2/2 _ J9 A_-8V CP4003 CP4003 A_+8V C125Z1-19 OPTION A HDAM_GND HDAM_GND D4010 D4009 H/P_L H/PL 1N4007S...
  • Page 34 SCH26 RS_CNT MAIN 3/3 RS_CNT PART (AVR_X2500HE3_X3500H_SR5013 ONLY) CP4700 SR5013 ONLY X2500H/SR5013 : INPUT 1/1 C1 BKT4403 CLP4003 CLP4002 AVR-X3500 ONLY X3500H : SIDE CNT 1/1 _ L1 TO CN4701 R1452 C1341 OPEN D1094 C1342 4.7U-K-1608 LBAS16HT1G C1343 OPEN U1019...
  • Page 35 ZONE2 PURE STATUS PRESET M-DAX FUNCTION ENCODER B’D ON/OFF DIMMER SELECT DIRECT SR5013 FRONT PANEL KEY LAYOUT BRACKET PURE DIRECT, M-DAX, ZONE2 ON/OFF, ZONE2 SELECT, PRESET CH-, PRESET CH+, DIMMER, STATUS, SOUND MODE R4477 R4465 R4483 BKT4402 M3.3V SWM3.3V VEC4401...
  • Page 36 ZJ6.2B ZJ39B ZJ39B ZJ39B 2M2 (5) 2M2 (5) 1M (5) 270K SQ2014 27mH 100/200 10N-K * AVR-S940/X2500 , SR5013 OPTION * FUSE OPTION ZD4165 * PCB QUALITY OPTION N1SG, N1B, K1B AVR E3,K(JP) ZJ15B F4140 F4141 F4140 F4141 AVR(E2) / SR(N1B,N1SG)
  • Page 37 SCH29 HDAM CURRENT_FB PART HDAM 1/1 (SR5013 ONLY) _CN4703 A_-8V R4190 A_-8V R4179 A_-8V KTC3875G R4172 KTA1504S KTA1504S Q4109 R4186 MAIN 3/3 G4 R4185 Q4058 Q4057 Q4059 Q4056 R4236 A_+8V KTA1504S KTA1504S KTC3875G Q4099 KTA1504S Q4060 R4349 Q4061 A_+8V KTA1504S...
  • Page 38 SCH30 PREOUT SR5013 PREOUT 1/2 R5600 EXTFR C5612 OPEN EXT_IN PART C5613 R5601 OPEN EXTFL EXTSW A_-7V R5602 CN5602 C5614 OPEN CN5602 AGND A_+7V U5600 TO CP4202 EXT_FR C5653 NJU72751AV C5652 C5615 100/16 R5603 AGND OPEN 100/16 EXT_FL ADR1 ADR0...
  • Page 39 SCH31 RS232 RS232 PART U4700 PQ120DNA TRIGGER ON/OFF C4710 JACK4700 C4708 ZD4700 C4704 10/50 10/50 ZJ16B 100N-K R4722 OPEN C4705 100N-K D4703 LBAS16HT1G 10/50 C4707 C4706 100N-K C4712 100N-K C4711 D4701 OPEN R4708 100N-K T1 OUT C4716 100N-K R1 IN R4709 R1 OUT R4721...
  • Page 40 SCH32 F-HDMI R3000 R3001 R3002 R3003 1K-1005 10K-1005 47K-1005 OPEN-1005 R3004 OPEN-1005 N3001 A111989-G-01-T W/O FLNG R3005 OPEN-1005 Q3000 RT1N141C F.HPA_D.. HP_DET Q3001 RT1N441C DDC_SDA DDC_SCK N3000 CE_REMOTE F.CEC F.CEC TXC- R3006 R3007 HPDF TXC_SHLD 0-1005 0-1005 F.HPA_D.. TXC+ D3000 LRB521S-30 DDCA_SDA TX0-...
  • Page 41 PRINTED CIRCUIT BOARDS DIGITAL, F HDMI Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu). DIGITAL (A SIDE) F HDMI (A SIDE) F HDMI (B SIDE) U1055 5M240ZT100C5N R1211 U2022 R2138 R2143 ADV7180 C2203 R2144 C2402 R2309 C2204 C2460 R2139 C2205 C2341 R2271...
  • Page 42 INPUT, VIDEO, FRONT CNT INPUT (A SIDE) INPUT (B SIDE) FRONT CNT (A SIDE) FRONT CNT (B SIDE) SR ONLY FLASHER_IN 27P/29P INPUT PCB MP1 KILLIR N4700 7020-08215-040-1V RC_OUT CP4207 FRONT_IRIN RC_IN H:12mm CP4200 MUTE3.3V U4201 RC_IN R4276 RC_IN REMOTE3.3V R4223 NJU72750AV M3.3V...
  • Page 43 AMP (A SIDE) G403 7CH AMP B'D MP CLAMP 402 BAR CODE WIRE J590 G400 G401 C408 7020-08117-000-0S WIRE G401 G402 WIRE BONDING CLAMP 401 CP401 BONDING BONDING R687 JW595 JW596 C533 C456 C424 CLAMP 400 R472 C528 R428 R558 VR404 C440 C472...
  • Page 44 MAIN, AUDIO IN, RS CNT, GUIDE L, HS TOP GUIDE, FH GUIDE MAIN (A SIDE) MAIN (B SIDE) AUDIO IN (A SIDE) AUDIO IN (B SIDE) G4200 R4067 C4215 R4050 J4150 NJM4580CG U4005 R4063 C4226 C4225 C4223 FILTER OPTION C4224 - AVR_E2,E1C : BTT87B-01 IC4000 L4201...
  • Page 45 FRONT, USB, HDAM CNT, HP, TOP GUIDE FRONT (A SIDE) FRONT (B SIDE) USB (A SIDE) USB (B SIDE) CN4402 C4486 C4463 BD4408 M3.3V D/MGND R4448 SWM3.3V A+7V G4400 J4449 R4472 A-7V JK4400 L4400 C4487 C4470 VAUXR C4468 AGND C4462 C4483 BD4400 VAUXL...
  • Page 46 PREOU, RS232C, SMPS, HDAM PREOUT (A SIDE) PREOUT (B SIDE) SMPS (A SIDE) SMPS (B SIDE) SMPS B'D(MP) 7020-08116-000-0S BKT4141 NEUTRAL CP4140 LIVE BKT4140 C4226 R4255 Sec. C4140 R4140 L4201 Sec. AGND 470PF/250V AGND AGND C4141 Pri. AGND Pri. 470PF/250V AGND R4246 F4141...

  • Page 47: Level Diagram

    LEVEL DIAGRAM FRONT ch SR5013 LEVEL DIAGRAM FRONT ch NJU72750 NJU72343 ANALOG H/POUT SPEAKER LINE IN ＋ GAIN ADJ. AK4458VN AK5358B ＋ ＋ PREOUT － － to ZONE2 +30dB NJU72343 MAX. OUTPUT 4.2Vrms SP OUT Differential Out 4.48Vrms/8Ω AK4458 MAX SIGNAL LEVEL...
  • Page 48 CENTER, SURROUND, SURR.BCK ch SR5013 LEVEL DIAGRAM CENTER ch SURROUND ch SURR.BCK ch NJU72343 SPEAKER ＋ GAIN ADJ. AK4458VN ＋ ＋ PREOUT － － +30dB NJU72343 MAX. OUTPUT 4.2Vrms SP OUT Differential Out 4.23Vrms/8Ω AK4458 MAX SIGNAL LEVEL 0dBFS +20dB DOLBY LIMIT LEVEL (ALLch-3dBFS) 0dBFS = +/-2.8Vpp=1.98Vrms...
  • Page 49 SUBWOOFER ch SR5013 LEVEL DIAGRAM SUBWOOFER ch NJU72343 SPEAKER ＋ GAIN ADJ. AK4458VN ＋ ＋ PREOUT － － NJU72343 MAX. OUTPUT 4.2Vrms +30dB MAX SIGNAL LEVEL DOLBY LIMIT LEVEL (ALLch-3dBFS) 0dBFS = +/-2.8Vpp=1.98Vrms AK4458 0dBFS +20dB -10dBFS +10dB PREOUT 300mVrms...
  • Page 50 ZONE2 ch SR5013 LEVEL DIAGRAM ZONE2 NJU72750 NJU72343 from SPEAKER To MAIN LINE IN DA SB-ch ＋ ZONE GAIN ADJ. BD3812 ＋ ZONE2 PCM5100 +30dB BD3812 MAX. OUTPUT 4.2Vrms SP OUT PCM5100 4.23Vrms/8Ω 0dBFS = 2.0Vrms MAX SIGNAL LEVEL 0dBFS...
  • Page 51 ZONE2(LEGO) ch SR5013 LEVEL DIAGRAM ZONE2（LEGO） NJU72750 LINE IN To MAIN To ZONE2 PCM9211 To LEGO +30dB +20dB +20dB PCM9211 0dBFS=1.06Vrms +10dB +10dB -10dBFS LINE IN 200mV -8.5dB -20dBFS A/D IN -10dB -10dB 75.2mVrms (-23.0dBFS) -30dBFS -20dB -20dB -40dBFS -30dB...

  • Page 52: Block Diagram

    BLOCK DIAGRAM ANALOG AUDIO DIAGRAM SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C DA_SW 4IN / 4OUT ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343...
  • Page 53 DIGITAL AUDIO DIAGRAM SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK...
  • Page 54 VIDEO DIAGRAM SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUT TMDS OUTPUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I...

  • Page 55: Power Diagram

    POWER DIAGRAM SR5013 VCC DIAGRAM MAIN +B S1(AMP +B) MAIN -B A+8.0V A+7.0V KIA7808API DA+5.0V(AK4458VN/AK5358BET/PCM9211) KIA7805API DA+3.3V(PCM5100A) AP7361 A-7.0V KIA7908PI S2(+8V,-8V) A-8.0V PQ120DNA TRIGGER +12V BA08T V+5.0V R4032 JUMPER TUNER+3.3V AZ1117-3.3 RELAY MAIN TRANS KIA7905PI V-5.0V R1825 SWM5V FL5V M3.3V (CPU) AP7361 STBY3.3V...

  • Page 56: Wiring Diagram

    WIRING DIAGRAM SR5013 WIRE DIAGRAM AC CORD WI-FI_BT_ANT WI-FI_ANT HDMI PCB FFC CABLE 2P TAP (SMPS) SPK PCB LEGO V4.0 MODULE 40P CARD CABLE FRONT CNT PCB VIDEO PCB MAIN TRANS PREOUT PCB 13P WIRE (AUDIO IN) 7P TAP (FL)
  • Page 57 BDOWN Detect power down M3VPu IRQ4 Pd (S940 / X2500H) P33/TIOCD0/RXD6/ RC_IN Remote input M3Vpu RXD0/IRQ3-DS (SR5013 / NR1609NR) NC (S940 / X2500H / P32/TIOCC0/TXD6/ Flasher (Remote) input pin (When standby mode,set to NR1609 (EU/ -/Pd TXD0/IRQ2-DS inturrupt) JP) /FLASHER_...
  • Page 58 Internal PC2/RXD5 DA_POWER Digital audio power supply (DA3.3V,DA1.2V) control pin P75/SCK11 CEC_POWER2 CEC standby power control (for CEC Standby Mode 3) SEL_DATA Audio selector control pin for NJU72750/ 72751(SR5013) (BCM58305 P20/TXD0/IRQ8 E_TXD_MOEI Ethernet(Network Module) control pin Internal PC1/SCK5/IRQ12 DAC_PLD_ERR Detect PLD error (from Audio PLD)
  • Page 59 HDMI Rx (MN864788) audio interrupt signal det CEC3VPu PD4/IRQ4/AN112 SW_SDA HDMI TMDS switch I2C ccontrol pin for TMDS261B DV3VPu DE_RST (NR1609 / SR5013) / Video decoder (ADV7180) reset control pin NC (S940 / X2500H) PD3/IRQ3/AN111 788_1_HINT CEC3VPu HDMI Tx (MN864788) interrupt signal input pin...
  • Page 60 PCM9211 www.ti.com SBAS495 – JUNE 2010 PIN CONFIGURATIONS AD8195ACPZ ( F_HDMI : U3000) PCM9211 (DIGITAL : U1040) PT PACKAGE AD8195 LQFP-48 (TOP VIEW) PIN CONFIGURATION AND FUNCTION DESCRIPTIONS ERROR/INT0 VDDRX NPCM/INT1 RXIN1 MPIO_A0 30 AVCC PIN 1 30 AVCC MPIO_A1 RXIN2 29 PE_EN INDICATOR...
  • Page 61 PCM9211 BLOCK DIAGRAM www.ti.com SBAS495 – JUNE 2010 BLOCK DIAGRAM DESCRIPTION NAME FILT TOLERANT AUXIN 0 26 MS/ADR1 Software control I/F, SPI chip select / I2C slave address AUTO RXIN7 setting1(2) RXIN 0 RXIN0 SCKO DOUT RXIN 1 RXIN1 MAIN OUTPUT 27 MODE Control mode setting, (see the Serial Control Mode section,...
  • Page 62 CS49844A (DIGITAL : U1073) W9864G6KH-5 (DIGITAL : U1023) SD_A3, EXT_A3, DAO3_D3, XMTA, GPIO113 SD_A2, EXT_A2 SD_D11, EXT_D3 SD_A1, EXT_A1 SD_D12, EXT_D4 SD_A0, EXT_A0 SD_D13, EXT_D5 SD_A10, EXT_A12 GNDIO4 SD_BA0, EXT_A13 VDDIO4 SD_BA1, EXT_A14 SD_D14, EXT_D6 W9864G6KH SD_CS, EXT_OE SD_D15, EXT_D7 SD_RAS, EXT_CS1 SD_D0, EXT_D8 SD_CAS, EXT_CS2...
  • Page 63 AK4458VN 40 +105 C (Exposed pad is connected to ground) 40 +85 C (Exposed pad is open) 48-pin QFN (0.5mm pitch) AKD4458 Evaluation Board for AK4458 AK4458VN (DIGITAL : U1051) Block diagram Pin Configurations CLOCK BUFFER CONTROL SIGNAL GENER ATOR COMMAND DECODER COLUMN DECODER...
  • Page 64 [AK4458] FUNCTIONAL BLOCK DIAGRAM No. Pin Name I/O Function PD State 4. Block Diagram and Functions CAD0_I2C Chip Address 0 Pin in I2C Bus serial control mode Chip Select Pin in 3-wire serial control mode LDOE TVDD VDD18 DVSS AVDD AVSS Hi-Z Audio Data Format Select in Parallel control mode.
  • Page 65 SLAS764 – MAY 2011 www.ti.com DEVICE INFORMATION TERMINAL FUNCTIONS, PCM510x PCM5100A (DIGITAL : U1052) NJU72343 (INPUT : U4202) PCM510X (top view) Pin Function No. Symbol Function No. Symbol Function AREF Analog reference potential terminal DATA IC control data input Address selection terminal CLOCK IC control clock input InA2...
  • Page 66 NJU72751A (INPUT : U4204, PREOUT : U5600) NJM2586AVC3(VIDEO : U5002) 75Ω 75Ω CH1 OUT InA1 OutA1 CH1 IN1 CH1 IN1 Driver Driver Bias Bias Cont1 Cont1 InA2 OutA2 Cont1 Cont1 Cont2 Cont2 75Ω 75Ω CH1 IN2 CH1 IN2 CH2 OUT Driver InA3 OutA3...
  • Page 67 PATTERN DETAIL 2. FL DISPLAY FLD (GP1261AI) (FRONT : FLT4400) 42-1 43-1 44-1 45-1 46-1 47-1 48-1 42-2 43-2 44-2 45-2 46-2 47-2 48-2 42-3 43-3 44-3 45-3 46-3 47-3 48-3 42-4 43-4 44-4 45-4 46-4 47-4 48-4 PIN CONNECTION 42-5 43-5 44-5...
  • Page 68 3. Remote Code Table Marantz Remote Command Chart HDMI Control (CEC) ON 16 84 08 RCRC51608408 HDMI Control (CEC) OFF 16 84 09 RCRC51608409 14-Mar-18 This pink color's cell = New assigned code Surround SURROUND MODE (Toggle/NEXT) 16 37 RCRC516037...
  • Page 69 Top Middle R + (Up) 16 26 27 RCRC51602627 Cursor Up 24 80 01 RCRC52408001 Top Middle R - (Down) 16 26 28 RCRC51602628 Cursor Down 24 81 01 RCRC52408101 Top Rear L + (Up) 16 26 29 RCRC51602629 Cursor Left 24 85 01 RCRC52408501 Top Rear L - (Down)
  • Page 70 [Tuner-1] 4 17 29 04 RCRC51702904 Smart Select3 16 92 23 RCRC51609223 [Tuner-1] 5 17 29 05 RCRC51702905 Smart Select4 16 92 24 RCRC51609224 [Tuner-1] 6 17 29 06 RCRC51702906 Smart Select5 16 92 25 RCRC51609225 [Tuner-1] 7 17 29 07 RCRC51702907 Control Cursor Up...
  • Page 71 MECHANICAL DISASSEMBLY Flowchart 1. FRONT PANEL ASSY 2. RADIATOR ASSY 3. DIGITAL PCB 4. VIDEO PCB 5. PREOUT PCB 6. MAIN PCB 7. SMPS PCB 8. TRANS EXPLODED VIEW PACKAGING VIEW...
  • Page 72 DISASSEMBLY Flowchart • Remove each part following the flow below. • Reassemble the removed parts in the reverse order. • Read "SAFETY PRECAUTIONS" before reassembling the removed parts. • If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise. •...

  • Page 73: Front Panel Assy

    • The photographs with no shooting direction indicated were taken from the top of the unit. (1) Remove the screws. • Photos of SR5013 U are used in this manual. The viewpoint of each photograph (Shooting direction : X) [View from the top] ↓Shooting direction: B↓...

  • Page 74: Radiator Assy

    2. RADIATOR ASSY 3. DIGITAL PCB Proceeding : TOP COVER → RADIATOR ASSY Proceeding : TOP COVER → DIGITAL PCB (1) Remove the screws. (1) Remove the screws. ↓Shooting direction: D↓ ↓Shooting direction: C↓ View from the bottom ↑Shooting direction: A↑ (2) Remove the screws.

  • Page 75: Video Pcb

    4. VIDEO PCB 6. MAIN PCB Proceeding : TOP COVER → DIGITAL PCB → VIDEO PCB Proceeding : TOP COVER → DIGITAL PCB → VIDEO PCB → PREOUT PCB → PREOUT PCB (1) Remove the connector. (1) Remove the screws. CN5000 View from the bottom (2) Remove the screws.

  • Page 76: Exploded View

    3 X2 C X2 45 X2 1 X2 C X6 20X2 23 X4 O X2 22 X4 SR5013 ALL WARNING: E X8 Parts marked with this symbol z have critical characteristics. Use ONLY replacement parts recommended by the manufacturer. P X4...
  • Page 77 PACKAGING VIEW http://dmedia.dmglobal.com/Document/DocumentDetails/24549 Parts List : *MANUAL POLYBAG ASSY* *MIC ASSY* ZIPPERBAG(A4size) ZIPPERBAG(A5size) SETUP MIC STAND SIZE : 350mm x 210mm Notes on RADIO (ALL) SPOTIFY insertion sheet (U/N) This part together with document and zipper bag are supplide. Cautions on Using Batteries (N Only) QUICK START GUIDE ( ALL ) MIC STAND ASSEMBLY INSTRUCTIONS SAFETY INST.

  • Page 78: Troubleshooting

    REPAIR INFORMATION TROUBLE SHOOTING SPECIAL MODE 1. POWER Special mode setting button 2. Analog video 1. Version Display Mode 3. HDMI/DVI 2. PANEL / REMOTE LOCK Selection Mode 4. AUDIO 3-1. Selecting the Mode for Service-related 5. Network / Bluetooth / USB 3-2.
  • Page 79 TROUBLE SHOOTING 1. POWER 1.1. The unit does not power on 1.2. Fuse is blown The unit does not power on Blown fuse Check for short circuits between the Does the power indicator on the front panel flash Check the rectifier diode in the Does the power shut down after several seconds? Check for leaks and short circuits regulator output terminal and GND...

  • Page 80: Analog Video

    2. Analog video CVBS / COMPONENT / HDMI OUT NG Input CVBS / COMPONENT Input CVBS Input COMPONENT Input Function : CBL / SAT Function : CBL / SAT HDMI Check the input signal to the VIDEO DECODER. Can a signal be confirmed at the following To "A"...
  • Page 81 Input Input CVBS COMPONENT Check the settings of each IC. Check the settings of each IC. Are the following voltages set? Are the following voltages set? DIGITAL PCB DIGITAL PCB faulty. DIGITAL PCB DIGITAL PCB faulty. [N1039 : 12pin] : Hi (3.3 V) [N1039 : 11pin] : Lo (0 V) [N1039 : 13pin]...
  • Page 82 3.1. No picture or sound is output (HDMI to HDMI) No picture or sound is output. (8) When using a MARANTZ Blu-ray/DVD player, is the "HDMI" indicator of the fluorescent display lit? Proceed to YES when using a Blu-ray/DVD player produced by other manufactures.
  • Page 83 (15) Are a picture and sound output when a differ- The TV is faulty. ent TV is used? Check the unit. "HDMI "Rx/Tx" Failure Detection"...
  • Page 84 4. AUDIO 4.1. AUDIO CHECK No audio output CHECK 1 INPUT SURROUND MODE SOURCE Check the ANALOG AUDIO BLOCK Audio output OK? ANALOG 2CH DIRECT ANALOG CHECK 2 INPUT SURROUND MODE SOURCE Check the DIGITAL AUDIO BLOCK Legacy Audio output OK? COAX or OPT (PCM or DolbyDigital or dts…) CHECK 3...

  • Page 85: Analog Audio

    4.2. Power AMP (AMP PCB) 4.3. Analog audio When using the protection pass mode, do not connect speakers to the speaker terminals. No audio output. No audio output. Protection is activated. Is a voltage of ± 8V supplied to INPUT PCB Repair the ±...

  • Page 86: Cannot Connect To The Network

    5. Network / Bluetooth / USB 5.1. Cannot connect to the network Check the connection environment The circuit of NET5V POWER Insert the LAN cable correctly and then turn on Can the output voltage (5V) to Is NET5V POWER [U1018 : 48pin Is the LAN cable correctly inserted? between [U1018-Q1080 : FET- the power again.

  • Page 87: Cannot Establish A Bluetooth Connection

    5.2. Cannot establish a Bluetooth connection Check the Bluetooth device being used Are the versions of the HEOS Version displayed in The Network Module software is faulty. Version Check Mode? Is the Bluetooth device compatible with the A2DP Use a device that is A2DP profile compatible. profile? The circuit of Network Module is faulty.
  • Page 88 5.3. Cannot recognize the connected USB device 5.4. No picture or sound is output Check the USB device being used Checking the unit (If no picture is output) Are digital video signals(LEGOPCK, LEGOVS, The circuit around Network Module, [U1026 : Is a USB hub being used? Do not use a USB hub.
  • Page 89 DIGITAL test point USB test point U1055 5M240ZT100C5N CN4402 R1211 R2138 U2022 CN4402 R2143 ADV7180 C2203 R2144 C2402 R2309 C2204 C2460 R2139 C2205 C2341 R2271 N1019 BKT1001 R2270 R2269 N1017 R2268 BKT1002 C2342 C2198 C2421 U1008 R2329 C4463 R2234 R2233 N1014 C1951 C1901...
  • Page 90 6. SMPS Operation waveform for each part DC 5V is not output. After primary side rectification Primary drain (Caution: High voltage, electric shock) (Caution: High voltage, electric shock) Replace the [U4140 : TOP268VG C4148 0.01UF/250V OPTION Is [U4140 : TOP268VG] dam- OPTION and D4142 / D4143 / D4144 / D4142...
  • Page 91 AUDIO CHECK PATH : Digital Signal : Analog Signal HDMI BLOCK CHECK6 HDMI HDMI SPEAKER OUTPUT HDMI INPUT OUTPUT CHECK5 INPUT PREOUT HDMI Transceiver CHECK4 AVR Supported "HD AUDIO" OUTPUT HDMI Transceiver MN864788 ARC INPUT MN864788 TNDS FRONT BUFFER HDMI AD8195 INPUT Digital audio BLOCK...
  • Page 92 HDMI "Rx/Tx" Failure Detection 1. Prior checking Check item(1). Checking the HDMI connector Checking the condition of the HDMI pin (rear/front). There are deformed pins. Replace the HDMI connector. Check for deformed pins. None of the pins are deformed. Check by following the flow chart for "3.
  • Page 93 2. Preparations for checking HDMI Switcher reception/transmission register 2-3. Device configuration method 2-1. Necessary devices PC settings : Execute the serial communication program, Termite.exe. Check the product settings. 2-a) Player with an HDMI terminal 2-b) TV with an HDMI terminal (* NOTE : Do not use a computer monitor.) After executing Termite.exe, click [Settings].
  • Page 94 Click the [click to connect] button to start communication. When the settings are correct, the following message will be displayed in the window of After a connection is established successfully, the display of the button name will change as Termite. shown in Figure 4.
  • Page 95 3. Starting detecting the point of failure Check item(3.1). (2-2) Display when an Error is not detected. Check the power supply status and communication status with the CPU of each device. L1 1 Auto Start in HDMI Diagnostics mode and follow the procedures below. Test (1) Start in HDMI Diagnostics mode Cancel the mode, and proceed to...
  • Page 96 Check item(3.2.). : Check operation of the HDMI input terminal. Check item(3.4.). : Check operation of the HDMI output termi- nal. Go to check item (3-14.1.) (GUI IC [ADV8003] failure detection When the HDMI input terminal of this device is connected to the player correctly, is sound heard from procedure 2 the speaker? ※...
  • Page 97 3-1. Error Code H1-01 failure detection procedure Checking device. [U1039 : MN864788] Check the power supply voltage. (HDMI Tx) Checking the reset waveform. (HDMI Tx) Check item(3-1.1.). Check the power supply voltage. : Check item(3-1.3.). Checking the reset waveform : Check the waveform.
  • Page 98 Check the I2C communication line. (HDMI Tx) Check item(3-1.4.). Check the I2C communication line : Check the CPU. Is the "I2C" waveform of the TP near the HDMI Tx [U1039] correct (like the one shown in the diagram) when the power is turned on? HSDA Check item(3-1.5.).
  • Page 99 3-2. Error Code H1-02 failure detection procedure Checking device. [U1000 : MN864788] Check the power supply voltage. (HDMI Rx) Checking the reset waveform. (HDMI Rx) Check item(3-2.1.). Check the power supply voltage. : Check item(3-2.3.). Checking the reset waveform : Check the waveform.
  • Page 100 Check the I2C communication line. (HDMI Rx) Check item(3-2.4.). Check the I2C communication line : Check the CPU. Is the "I2C" waveform of the TP near the HDMI Rx [U1000] correct (like the one shown in the diagram) when the power is turned on? HSCL HSDA...
  • Page 101 3-3. Error Code H1-03 failure detection procedure Checking device. [U1003 : MN864788] Check the power supply voltage. (HDMI Rx) Checking the reset waveform. (HDMI Rx) Check item(3-3.1.). Check the power supply voltage. : Check item(3-3.3.). Checking the reset waveform : Check the waveform.
  • Page 102 Check the I2C communication line. (HDMI Rx) Check item(3-3.4.). Check the I2C communication line : Check the CPU. Is the "I2C" waveform of the TP near the HDMI Rx [U1000] correct (like the one shown in the diagram) when the power is turned on? HSCL HSDA...
  • Page 103 3-4. Error Code H1-06 failure detection procedure Checking device. [U1026 : ADV8003] Check the power supply voltage. Checking the reset waveform. Check item(3-4.1.). Check the power supply volt- Check item(3-4.2.). Check the power supply volt- Check item(3-4.3.). Checking the reset : age.
  • Page 104 Check the I2C communication line. Check item(3-4.4.). Check the I2C communication line : Check the CPU. Is the "I2C" waveform of the TP near the CPU [U1018] correct (like the one shown in the diagram) when the power is turned on? U1018 AVSDA AVSCL *The diagram shows an example.
  • Page 105 3-5. Error Code H1-14 failure detection procedure 3-6. Error Code H1-15 failure detection procedure Checking device. [U1028, U1029 : A3R12E40DBF-8E] Checking device. [U1027 : W25Q128JVFIQ] Check item(3-6.1.). Check item(3-5.1.). Write to the GUI ROM. Check soldering of IP SCALER [U1026], DDR2 [U1028/U1029] and its peripheral circuits. Check soldering of the resistors [R1688/1689/1692/1695 to 1700/1703 to 1711] between IP SCALER and...
  • Page 106 3-7. Error Code H1-04 failure detection procedure 3-8. Error Code H1-05 failure detection procedure Checking device. [U1103 : TMDS261B] Checking device. [U2022 : ADV7180] Check item(3-7.1.). Check item(3-8.1.). Replace [U1103] with a new device. Replace [U2022] with a new device. Recheck from check item (3.1.) Recheck from...
  • Page 107 3-9. Error Code H1-08 failure detection procedure Checking device. [U1073 : CS49844A] Check the power supply voltage. Checking the reset waveform. Check item(3-9.1.). Check the power supply volt- Check item(3-9.2.). Check the power supply volt- Check item(3-9.3.). Checking the reset : age.
  • Page 108 Check the SPI communication line. Check item(3-9.4.). Check the SPI communication line : Check the CPU. Is the "SPI" waveform of the TP near the DSP [U1073] correct (like the one shown in the diagram) when the power is turned on? 3 pin CLK 4 pin MOSI 6 pin CS...
  • Page 109 3-10. Error Code H1-12 failure detection procedure Checking device. [U1040 : PCM9211] Check the power supply voltage. Checking the reset waveform. Check item(3-10.1.). Check the power supply volt- Check item(3-10.2.). Check the power supply volt- Check item(3-10.3.). Checking the reset : age.
  • Page 110 Check the communication line. Check item(3-10.4.). Check the communication line : Check the CPU. Is the waveform of the TP near the DIR [U1040] correct (like the one shown in the diagram) when the power is turned on? U1040 MOSI MISO *The diagram shows an example.
  • Page 111 3-11. HDMI Rx [MN864788] failure detection procedure Checking operation between the HDMI (Rx) device and the player Check item(3). Checking the +5V/DDC status register : Example Send the following command from Termite.exe. HDMI Rx1 (When checking HDMI inputs 1, 2, and 3) b In order to check, connect the player to the HDMI terminal and configure the player as AVR source.
  • Page 112 When the results of check item (3-11.1.) are "00" When the results of check item (3-11.2.) are "00 or 04" (Detection of 5V is not OK) (Detection of DDC is not OK.) Check the +5V voltage. (HDMI Rx) Check the DDC line. (HDMI Rx) Check item(3-11.3.).
  • Page 113 When the results of check item (3-11.2.) are "22" (Detection of DDC is OK.) Checking the TMDS status register 3.3V TMDS Signal TMDS Check item(3-11.5.). Checking register of the TMDS CLK detection sta- Example tus register : Example of waveform in check ① Example of waveform in check ② Send the following command from Termite.exe.
  • Page 114 3-12. Front HDMI Buffer IC [AD8195] failure detection procedure Checking operation between the HDMI (Front HDMI Buffer) and the player Checking the +5V/DDC status register (Front HDMI Buffer) Check item(3-12.3.). Checking the 5V status of the register : Example Send the following command from Termite.exe. b In order to check, connect the player to the HDMI terminal and configure the player as AVR source.
  • Page 115 When the results of check item (3-12.3.) are "00" When the results of check item (3-12.4.) are "00 or 04" (Detection of 5V is not OK.) (If the DDC are not OK) Check the +5V voltage. (Front HDMI Buffer) Check the DDC line. (Front HDMI Buffer) less than 100KHz Check item(3-12.5.).
  • Page 116 When the results of check item (3-12.4.) are "22" (Detection of DDC is OK) Checking the TMDS status register Check item(3-12.7.). Check the TMDS CLK detection status of the Check item(3-12.8.). Checking the TMDS input waveform. : Example 3.3V TMDS Signal register : : Check the TMDS waveform at the following test point.
  • Page 117 3-13. HDMI transmission IC [MN864788] failure detection procedure Check the output terminal. Check item(3-13.1.). Check the video output port for failure. : Check the Monitor 1 output video signal is correct. After checking the Monitor 1, change the HDMI cable connection from OUT1 to OUT2. Turn off the AV AMP and turn it on again.
  • Page 118 When the results of check item (3-13.1.) are "No video signal is output from both Monitor 1 and Monitor Checking between Monitor1 and the TV. 2". Connect Monitor1 to the TV and check the following items with the TV turned on. Checking operation between the HDMI (Rx) device and the HDMI device (Tx).
  • Page 119 Example When the results of check item (3-13.4.) are "30" (Detection of HPD is OK / Detection of RXSENSE is OK ) Checking the EDID register. (Monitor1) Check item(3-13.5.). Check the Monitor EDID : ① Unplug the AC cord. Plug the AC cord into a power outlet. The first eight bytes are nor- ②...
  • Page 120 When the results of check item (3-13.4.) are "10" When the results of check item (3-13.4.) are "20" (Detection of HPD is OK / Detection of RXSENSE is not OK ) (Detection of HPD is not OK / Detection of RXSENSE is OK ) Check the RXSENSE.
  • Page 121 When the results of check item (3-13.4.) are "00" Checking between Monitor 2 and the TV. (Detection of HPD is not OK / Detection of RXSENSE is not OK ) Connect Monitor2 to the TV and check the following items with the TV turned on. Check the RXSENSE/HPD.
  • Page 122 When the results of check item (3-13.11.) are "03" (Detection of HPD is OK / Detection of RXSENSE is OK ) Example Checking the EDID register. (Monitor2) Check item(3-13.12.). Check the Monitor EDID : ① Unplug the AC cord. Plug the AC cord into a power outlet. ②...
  • Page 123 When the results of check item (3-13.11.) are "01" When the results of check item (3-13.11.) are "02" (Detection of HPD is OK / Detection of RXSENSE is not OK ) (Detection of HPD is not OK / Detection of RXSENSE is OK ) Check the RXSENSE.
  • Page 124 When the results of check item (3-13.11.) are "00" (Detection of HPD is not OK / Detection of RXSENSE is not OK ) Checking the HPD/RXSENSE status register. (Monitor2) Check item(3-13.17.). Checking the HPD and RXSENSE. : Does the test point of RXSENSE close to the HDMI output terminal [N1030] indicate the (3.3V)? Does the voltage of HPD test point close to the HDMI output terminal [N1030] indicate Hi (3-5 V)?
  • Page 125 3-14. GUI IC [ADV8003] failure detection procedure Checking the TMDS status register (GUI -> HDMI Tx) Check item(3-14.1.). Check the TMDS CLK detection status of the Example register. Send the following command from Termite.exe. Send the command "i 0006 00FF 0001".
  • Page 126 3-15. HDMI SW IC [TMDS261B] failure detection procedure Checking the TMDS status register (HDMI SW -> GUI) Example Check item(3-15.1.). Check the TMDS CLK detection status of the register. Send the following command from Termite.exe. Send the command "i 00E2 0004 0001".
  • Page 127 4. Device implementation location DIGITAL (A SIDE) F-HDMI (A SIDE) U1055 R1692, R1695,R1696,R1697, 5M240ZT100C5N R1211 R1698,R1699,R1700,R1703, R2138 U2022 ADV7180 C2203 R2143 C2402 R2309 C2204 R2144 R1704,R1705,R1706,R1707,R1710, C2460 R2139 C2341 C2205 N1019 R2271 N3001 BKT1001 R2270 R2269 U2022 N1017 R2268 BKT1002 C2342 C2198 R3003...

  • Page 128: Clock Flow & Wave Form In Digital Block

    CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK WAVE FORM SW1_SD0 CH0ASD0 TX64FS CH1ABCLK DIR input SW1_SD1 CH0ASD1 TXFS CH1ALRCLK IC1000 SW1_SD2 IC1039 CH0ASD2 TXI2S0 CH1ASD0 MN864788 MN864788 SW1_SD3_SPDIF CH0ASD3 HDMI Rx HDMI Tx CH0ALRCLK SW1_LRCK CH0ABCLK SW1_BCLK SW1_MCLK CH0AMCLK TXSPDIF CH0ASD3 U1041...

  • Page 129: Special Mode Setting Button

    SPECIAL MODE Special mode setting button b No. 1 - 4, 6 - 8 : While holding down buttons "A", "B" and "C" simultaneously, press the power button to turn on the power. b No. 5, 9, 10 : While the power is on, hold down buttons "A" and "B" for at least 3 seconds . Mode Button A Button B Button C Descriptions...
  • Page 130 → Q6 WiFi Mac Address → Q7 BT Mac Address → Q8 Audyssey App Interface Version ***** -****** q Model destination information, Serial Number： t Audio PLD : SR5013 \ A.PLD Q1 HEOS Module : Q8 Audyssey App Interface Ver : SN******...
  • Page 131 1.4. Error display See the table below for descriptions of the displayed errors and countermeasures for these. If multiple errors occur, only one item is displayed. The priority order is w, e, r, t, y, q. Condition States Display TROUBLE SHOOTING The model name, brand name and region information written in the firmware are compared L1 FIRM to the region settings in the PCB.
  • Page 132 Condition States Display TROUBLE SHOOTING L1 DSP Boot error 1 (After reset the DSP, DSP_Flag0 port is "Low") ERROR Boot Error 2 (After reset the DSP, MCU received state error command) Signal Detect Error (No response after input set for 1sec) Mode Change Error (No response after mode change for 1sec) •...
  • Page 133 1.5. Version Display in the Setup Menu Follow the steps below to display the firmware information. (1) Press the "SETUP" button on the remote control. (2) Select "General - Information - Firmware". The version information is displayed as a 16-digit number as shown in the screenshot below. General/Firmware Version XXXX-XXXX-XXXX-XXXX...
  • Page 134 2. PANEL / REMOTE LOCK Selection Mode 2.1. Actions Switch the PANEL LOCK and REMOTE LOCK modes between on and off. RC LOCK 2.2. Starting up While holding down buttons "M-DAX" and "DIMMER" simultaneously, press the power button to turn on the power.
  • Page 135 3-1. Selecting the Mode for Service-related 3-1.1. Actions Select diagnostic mode (service path check mode), protection history display mode, 232C standby clear 4OP INFO mode, Operation Info mode, TUNER STEP mode or Remote ID Setup Mode. 3-1.2. Starting up While holding down buttons "ZONE2 SOURCE" and "STATUS" simultaneously, press the power button Operation Info for the unit can be checked.

  • Page 136: Protection History Display Mode

    3-2. Protection History Display Mode 3-2.1. Actions (3) DC (if the last protection is DC) This mode enables the unit to record and display the event when the THERMAL, ASO or DC protection is activated. Cause : DC output of the power amplifier is abnormal. If protections have been activated multiple times, the latest protection operation is recorded.
  • Page 137 3-2.4. Clearing the Protection History 3-3. 232C Standby Clear Mode There are two ways to clear the protection history. 3-3.1. Actions (1) Activate Protection History Display Mode. Press the "STATUS" button to display the protection Switches from 232C standby mode to normal standby mode. history.
  • Page 138 3-4. Operation Info Mode 3-4.1. Actions (3) DC / ASO Protection count This mode enables the unit to display the accumulated operating time, power On count and each Protect protection count. DC:____ 3-4.2. Starting up ASO:___ While holding down buttons "ZONE2 SOURCE" and "STATUS" simultaneously, press the power button "STATUS"...
  • Page 139 3-5. TUNER STEP mode (U / N only) 3-5.1. Actions This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed. 3-5.2. Starting up While holding down buttons "ZONE2 SOURCE" and "STATUS" simultaneously, press the power button to turn on the power.

  • Page 140: Network Initialization Mode

    4. Protection Pass Mode 5. Network Initialization Mode 4.1. Actions 5.1. Actions • This mode allows the power to be turned on without activating protections. The following items are initialized. • This mode functions in the same way as normal power-on, except that protections are not activated. Network setup •...
  • Page 141 6. Clearing the Operation Info 7. Log Capture feature 6.1. Actions 7.1. Actions • Displays the accumulated operating time of the unit, the number of times the power was switched on, • Acquires the Network Module log. and the number of occurrences of each protection. •...
  • Page 142 DIAGNOSTIC MODE Service Path Check Mode 1.1. Actions This function is convenient for confirming problem paths in the product and checking the paths after repairing. The Video and Audio paths can be checked. The backup data is not rewritten. 1.2. Starting up While holding down buttons "ZONE2 SOURCE"...
  • Page 143 Paths to be confirmed Display Settings What to confirm Input Source : HEOS Music ・ Digital(PCM) input ⇒ Speaker output (Surround Back (ZONE2) L/R) Input Mode : Auto ・ Digital(PCM) input ⇒ Pre OUT output (ZONE2 L/R) fig.A03a DIGITAL Sound mode : STEREO A03Z2DIG (ZONE2) fig.A03b...
  • Page 144 Paths to be confirmed Display Settings What to confirm Input Source : CBL/SAT ・ When the power supply of a TV is put in the standby mode, make sure that the power supply HDMI Control : On of this unit is also put in the standby mode. HDMI CEC MAIN ZONE : On ( b The input source can be switched to any source except CBL/SAT.)

  • Page 145: Diagnostic Path Diagram

    DIAGNOSTIC PATH DIAGRAM fig.A01 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 146 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 147 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 148 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 149 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 150 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 151 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 152 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 153 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 154 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 155 SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUTPUT TMDS OUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I HDMI5...
  • Page 156 SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUTPUT TMDS OUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I HDMI5...
  • Page 157 SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUTPUT TMDS OUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I HDMI5...
  • Page 158 SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUTPUT TMDS OUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I HDMI5...
  • Page 159 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 160 SR5013 ANALOG AUDIO DIAGRAM DA_FL DA_FR DA_C 4IN / 4OUT DA_SW ANALOG SWITCH DA_SL NJU72751AV DA_SR DA_SBL H/P-L DA_SBR H/P-R 4IN / 4OUT ANALOG SWITCH NJU72751AV INVERTING BUFFER (FL-B/FL-H/BI-AMP/ZONE) 7-INPUT/3-OUT (FR-B/FR-H/BI-AMP/ZONE) NJU72750AV 8-CH VOLUME NJU72343 ALL MODEL : FM/AM...
  • Page 161 SR5013 DIGITAL AUDIO DIAGRAM TMDS TMDS TMDS HDMI OUT1 OUT0 HDMI OUT2 OUT1 AD8195 HDMI2.0 TX FRONT TMDS MN864788 HDMI BUFFER SW1_SD0 SW1_SD1 SW1_SD2 HDMI1 HDMI2.0 RX SW1_SD3_SPDIF MN864788 (HDCP 2.2 : 4 INPUTS) SW1_LRCK HDMI2 SW1_BCLK SW1_MCLK HDMI3...
  • Page 162 SR5013 VIDEO DIAGRAM AD8195 FRONT HDMI TMDS OUTPUT BUFFER OUT0 HDMI1 HDMI2.0 TX TMDS OUT MN864788 HDMI2.0 RX MN864788 (HDCP 2.2 : 4 INPUTS) TMDS OUTPUT TMDS OUT TMDS OUT HDMI2 W25Q128JVFIQ 4K OSD HDMI3 OUT1 HDMI4 MX25L3206EM2I HDMI5...

  • Page 163: Jig For Servicing

    JIG FOR SERVICING Use the following jigs (extension cable kit) when repairing the PCBs. Order with your dealer for the jigs your dealer if necessary. CN5000 CAUTION : Incorrect connections may cause malfunction. Connection of Jig for DIGITAL PCB ---Items to Be Prepared--- 8U-110084S : EXTENSION UNIT KIT 1Set Insulation sheet (Not supplied)
  • Page 164 (4) Connect the expansion cables. Board-to-Board Connections Ref. No. Ref. No. FRONT CNT N1020 DIGITAL 21pin CP4200 INPUT 31pin CP4205 INPUT N1016 DIGITAL 23pin CP4201 INPUT N1014 DIGITAL 25pin CP3403 FRONT CNT N1039 DIGITAL 11pin CP4204 INPUT CN5003 VIDEO 25pin CP5000 FRONT CNT CN5000...

  • Page 165: Adjustment Procedure

    ADJUSTMENT Adjusting Idling Current NOTE： Adjusting the idling current when "ECO Mode" is set may damage the Power AMP. 1. Preparation (1) Prepare a DC voltmeter. AMP UNIT (2) Place the unit under normal usage conditions, away from highly ventilated areas such as next to an air conditioning machine or electric fan.
  • Page 166 UPDATING PROCEDURE AFTER REPLACING THE PCB. PROCEDURE AFTER REPLACING THE U-COM, ETC. FIRMWARE UPDATE PROCEDURE 1. Items necessary for update 2. Update preparation with a USB flash drive 3. Update method when the DIGITAL PCB or network module is replaced (Using a USB flash drive) 4.
  • Page 167 PROCEDURE AFTER REPLACING THE PCB. PROCEDURE AFTER REPLACING THE U-COM, ETC. The procedure after replacing the printed circuit boards is as follows. The procedure after replacing the u-COM (microprocessor), flash ROM, etc. is as follows. (1) Change the resistor for setting the region. Implement the update method when the DIGITAL PCB or network module is replaced.

  • Page 168: Firmware Update Procedure

    Update download file when the firmware is updated (Two files, "HW component" and "LEGO component") Download from SDI Model Name Model Area For HW component For LEGO component SR5013 U North America (U) Product ID : 100100670100 SR5013 N Europe (N) Product ID : 100100670200 DPMS_SR5013ALL_LEGO_xxxx.zip...
  • Page 169 2. Update preparation with a USB flash drive You can update the firmware by downloading the latest version with USB flash drive. 2.1. Connecting to the USB flash drive (1) Preparation • Windows PC • USB flash drive format : Prepare a USB flash drive formatted in FAT16 or FAT32. b We recommend a USB flash drive that has an LED installed.
  • Page 170 3. Update method when the DIGITAL PCB or network module is replaced (Using a USB flash drive) 3.1. File structure on USB flash drive (5) USB Update starts automatically. The Standby LED lights red. DIGITAL PCB or network module is replaced onto the USB flash drive in the following structure. Display during USB update (Main Display) L1 Wait After unzipping the files, store them in the root of the same USB flash drive.
  • Page 171 4. Update Method for Service Region Settings Copy the Service Region Settings from the USB flash drive to this unit. (5) Copy the files created on the USB flash drive. 4.1. Creating a Service Region Settings file (1) Click [Start button] - [Accessories] - [notepad] on the PC to launch the notepad. copy to USB flash drive (2) Enter "TEXT".
  • Page 172 5. Normal Firmware Update Method from USB Flash Drive 5.1. File structure on USB flash drive (4) Insert the USB flash drive into the USB port. Copy the normal update files onto the USB flash drive in the following structure. Download firmware After unzipping the HW component USB update files for the target model and LEGO USB update files, in USB flash drive.

  • Page 173: Network Connection

    6. Normal Firmware Update Method from OTA 6.2. Check and update the firmware Download the latest firmware from our website and update the firmware. 6.1. Network Connection Check if there is a firmware update available. It is also possible to check approximately how long the (1) System Requirements update will take.
  • Page 174 Display(Main Display) General L1 Updating Main CPU L2 ––– Main FBL (No used) DSP1 or DSP **min DSP2 ↓ b Except : NR1509/NR1609/SR5013 L1 Error DSP3 Update ErrorYYXX : DeviceID, : ErrorCode) YYXX b Except : NR1509/NR1609/SR5013 L3 Please check you DSP4 L3 : Content of the display is scrolled.
  • Page 175 Copyright © 2018 D&M Holdings Inc. All Rights Reserved.

Table of Contents

Save PDF