Zigen ZIG-SW41 User Manual

Hdmi 2.0 uhd 600 mhz 4x1 switch w/hdcp 2.2 & webos

Advertisement

Quick Links

 
 
 
 
Zigen HDMI 2.0 UHD 600 MHz 4x1
Switch w/HDCP 2.2 & WebOS
ZIG-SW41
USER MANUAL Ver. 1.0
zigencorp.com
Toll Free: 877-650-5252
International: +1 818-654-5252

Advertisement

Table of Contents
loading

Summary of Contents for Zigen ZIG-SW41

  • Page 1         Zigen HDMI 2.0 UHD 600 MHz 4x1 Switch w/HDCP 2.2 & WebOS ZIG-SW41 USER MANUAL Ver. 1.0 zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 2: Table Of Contents

            Table of Contents Copyright and Trademark Introduction Package Contents Features Specifications Block Diagram General Operation Dip Switch Settings Remote Control WebOS Command Syntax Commands Warranty 2   ZIG-­‐SW41   U SER   M ANUAL    ...
  • Page 3: Copyright And Trademark

      Copyright and Trademarks: All rights reserved by ZIGEN, INC. No part of this document may be reproduced in any form or by any means without written permission from the product manufacturer. Changes are periodically made to the information in this document.
  • Page 4: Introduction

    • High-end home theaters for showing UHD 2.0 content with HDCP 2.2 copy protection   Package Contents • 1 x ZIG-SW41 • 1 x 12V/2.5A DC Power Supply • IEC USA AC Cord 3’ • Remote Control • 1 x User Manual Features •...
  • Page 5: Specifications

            Specifications Video Bandwidth 18 GBPS Video Resolutions All SMPTE & VESA in HDMI 2.0 Specification. Max SMPTE UHD - 4096x2160P60/RGB/4:4:4 Color Space RGB, YUV Color Bit Depth 8-bit, 10-bit, 12-bit & 16-bit per pixel Note: Resolution and video bandwidth limited – ex. 2160P60 RGB or 4:4:4 8-bit would use almost the entire 18 GBPS of bandwidth.
  • Page 6         Distance - HDMI – Up to 5M @ 4K HDCP - 2.2, 1.4 or None CEC - Pass through Connections 4 x HDMI type A HDMI Input 1 x HDMI type A HDMI Output 1 x SPDIF Digital Audio Output 1 x RJ45 LAN Port for TCP/IP Control 1 x 9-pin RS-232 port 1 x 3.5mm IR In Port...
  • Page 7         zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 8: Block Diagram

            Block Diagram – Zigen ZIG-SW41 General Operation SW41 is the ultimate in high-bandwidth UHD switchers. With a full 600 MHz pixel clock the SW41 support high bandwidth sources and displays. Additionally, the SW41 supports HDCP 2.2 copy protection so you can be sure your customer is able to view the latest 4K UHD content –...
  • Page 9         While DIP 1 is ON (DOWN) the EDID is selected using the WebOS WebOS has 15 EDID tables to select from (more to come) for various use cases (see screen shot below). Additionally via the WebOS and custom EDID table can be loaded into the device.
  • Page 10 This speeds up the HDMI pipeline and can be very useful to avoid a looping condition when multiple HDMI devices are connected in series. ZIG-SW41 Remote Control – NEED TO INSERT SW41 remote control can be used for switching between inputs and powering the SW41 up or down.
  • Page 11         zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 12         SW41 Web OS Screenshot 12   ZIG-­‐SW41   U SER   M ANUAL    ...
  • Page 13: Webos

    WebOS Device Name & Notes • Device Name – default out of the box is ZIG-SW41-XXXX (last 4 digits of the serial number). You should change it if you are using more than 1 device (Change Name below) to whatever you want – ex. CR100SW – for conference room number 100 switcher.
  • Page 14 Choose File/Upload Firmware –   w hen necessary, this is where you select a new firmware file and upload firmware. • Reset DA14 –   w ill reset the ZIG-SW41 remotely. • Install Update –   w hen necessary is for installing new software updates to the unit.
  • Page 15: Command Syntax

            Command Syntax RS-232 & IP Commands   –   n ote the same commands are available via RS- 232 and IP – use @ for RS232, nothing for IP. RS-232 @SW41-XXXX(last 4 of SN)<sp> <parameter> <sp>... <parameter> <sp> <end of response>...
  • Page 16         Version @SW41-XXXX version Shows Zigen SW41, firmware release, firware revision, build date and serial number. Get Device Status @SW41-XXXX st Shows active and inactive ports – ex. Port 1 active, port 2 off, etc. HDMI Input Selection @SW41-XXXX insel <1|2|3|4>...
  • Page 17: Warranty

    Such specific warranties are available upon request to ZIGEN. ZIGEN makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold. The liability of ZIGEN with respect to any defective products will be limited to the repair or replacement of such products.

Table of Contents