Zigen sw42 hdmi 2.0 uhd 600 mhz 4x1 switch w/hdcp 2.2 & webos mirrored long distance hdbaset 100m port (18 pages)
Summary of Contents for Zigen SW-41Plus
Page 1
SW-41Plus 4x1 HDMI 2.0 Switch (2020) User Manual SW-41Plus 4x1 HDMI Switch User Manual UM-002-0001-000-00 | January 3, 2020...
Page 2
Please refer to Zigen dealers for the latest details. This warning symbol is used to alert anyone to heed important operating, installing, and maintenance instructions.
Note: Zigen highly recommends the use of premium 4K certified HDMI cables when viewing UHD 60p 4:4:4 or UHD 60p HDR 4:2:2 video resolutions. Zigen offers these premium 4K certified cables in varying lengths from 3 meters to 9 meters.
ZigNet. Power The SW-41Plus requires 12VDC @ 1Amp to power the unit. Use the included power adaptor and ensure the locking ring is threaded snugly to prevent inadvertent disconnection of the power jack. Make sure all video, audio, and control ports are properly connected before applying power to the SW-41Plus.
IR Remote Control 1.3. IR Remote Control The SW-41Plus IR remote control can be used for switching between inputs and powering the unit on or off. On/Off Button Press these buttons to toggle between the operating modes. OFF will set the unit in low power Stand- By mode.
The HDMI cable can then be connected in any of the following ways: Connect the HDMI cable to an Ultra HD display. Connect the HDMI cable to another Zigen switch or splitter, for cascading purposes. Note: Zigen highly recommends the use of premium 4K certified HDMI cables when viewing UHD 60p 4:4:4 or UHD 60p HDR 4:2:2 video resolutions.
Using the Front Panel The front panel of the SW-41Plus has a set of four LED push button selectors which are associated with each HDMI input connector on the rear of the switch. Press the Input button to select the desired input to route to the device output.
Using the IR Remote Control The included IR remote control is used to switch between HDMI inputs. The front panel of the SW-41Plus has a set of four LED indicators which are associated with each HDMI input on the switch.
1. Download ZigNetFinder.exe from Zigen’s website. 2. Connect the Windows PC to the same Ethernet LAN as the SW-41Plus. 3. Execute ZigNetFinder to detect the IP Addresses of all SW-41Plus devices on the network and copy the desired IP Address to a web browser.
RS-232 Configuration Configuring an RS-232 Connection 1. Connect the RS-232 port on the back of the SW-41Plus to a computer using an RS-232 cable. 2. Open a hyper-terminal app of your choice (Putty recommended) on a computer. 3. Enter default settings shown below:...
Ethernet connector on the back panel of the unit. With ZigNet, you are in full control. Managing all of the excellent features our Zigen products have to offer is just a click away with a built in and free web interface. Use the provided login information and web-link to view features like Audio, Diagnostics and Control pages.
To address a single unit, replace “xxxx” with the serial number located on the bottom of your unit. To address a cluster of SW-41Plus units use only “xxxx” without serial numbers. Note: These commands can be combined like so: “@SW41-xxxx st uptime version”...
Page 30
VESA – Video Electronics Standards Association is a technical standards organization for computer display formats. ZigNet – Proprietary web control developed by Zigen, Inc. HDMI 2.0 4K Specifications The table below specifies the only combinations of resolution, frame rate, color space and depth.
Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns.