Zigen ZIG-SW42 User Manual

Zigen sw42 hdmi 2.0 uhd 600 mhz 4x1 switch w/hdcp 2.2 & webos mirrored long distance hdbaset 100m port

Advertisement

Quick Links

Zigen SW42 HDMI 2.0 UHD 600 MHz
4x1 Switch w/HDCP 2.2 & WebOS.
Mirrored Long Distance HDBaseT
100M Port.
ZIG-SW42
USER MANUAL Ver. 1.0
zigencorp.com
Toll Free: 877-650-5252
International: +1 818-654-5252

Advertisement

Table of Contents
loading

Summary of Contents for Zigen ZIG-SW42

  • Page 1 Zigen SW42 HDMI 2.0 UHD 600 MHz 4x1 Switch w/HDCP 2.2 & WebOS. Mirrored Long Distance HDBaseT 100M Port. ZIG-SW42 USER MANUAL Ver. 1.0 zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 2: Table Of Contents

    Table of Contents Copyright and Trademark Introduction Package Contents Features Specifications Block Diagram General Operation Dip Switch Settings Remote Control WebOS Commands Warranty 2 ZIG-SW42 USER MANUAL...
  • Page 3: Copyright And Trademark

    Copyright and Trademarks: All rights reserved by ZIGEN, INC. No part of this document may be reproduced in any form or by any means without written permission from the product manufacturer. Changes are periodically made to the information in this document.
  • Page 4: Introduction

    Additionally, the SW42 is controllable via built in IR receiver or RS-232. The SW42 also has a mirrored HDBaseT 100 meter port (single CAT5e of higher). SW42 also routes Ethernet and is compliant with the entire Zigen ecosystem of products by routing network commands and control in receiver nodes.
  • Page 5: Specifications

     Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and more.  Built in IR sensor plus 3.5mm jack and remote control  IR In and Out jacks plus locking style (phoenix) connector 3-12VDC - works with everything! ...
  • Page 6 1 x 9-pin RS-232 port 1 x 3.5mm IR In Port 1 x 3.5mm IR Out Port 1 x 5-pin Locking IR Connection (phoenix) in/out 3-12 VDC 1 x IR Sensor (In) 1 x IEC 110-220VAC 6 ZIG-SW42 USER MANUAL...
  • Page 7 Temperature – Operating 32-122 F (0-50 C), Humidity: 20-90% non- condensing. Dimensions 1RU – Rack Mountable Weight 3 Pounds Certifications/Compliance FCC, HDBaseT, CE, RoHS, HDCP, HDMI zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 8 8 ZIG-SW42 USER MANUAL...
  • Page 9: Block Diagram

    Block Diagram – Zigen ZIG-SW42 General Operation SW42 is the ultimate in high-bandwidth UHD switchers. With a full 600 MHz pixel clock the SW42 support high bandwidth sources and displays. Additionally, the SW42 supports HDCP 2.2 copy protection so you can be sure your customer is able to view the latest 4K UHD content –...
  • Page 10 EDID they want for the desired application. Screen Shot – EDID Tables in WebOS Note: While DIP 1 is ON (DOWN), DIPs 2 and 3 are not used. DIP 4: Hot Plug Force UP (OFF) – Hot Plug Detection (HPD) is normal 10 ZIG-SW42 USER MANUAL...
  • Page 11 DOWN (ON) – HPD is forced active. In this mode the SW42 does not process HPD events from downstream to upstream (from the sink back to the source). This speeds up the HDMI pipeline and can be very useful to avoid a looping condition when multiple HDMI devices are connected in series.
  • Page 12: Remote Control

    ZIG-SW42 Remote Control SW42 remote control can be used for switching between inputs and powering the SW42 up or down. 12 ZIG-SW42 USER MANUAL...
  • Page 13 zigencorp.com Toll Free: 877-650-5252 International: +1 818-654-5252...
  • Page 14: Webos

    (Change Name below) to whatever you want – ex. CR100SW – for conference room number 100 switcher.  Notes – free form field for entering installer notes. Video Input  Use to select the input you want showing on the display EDID Management 14 ZIG-SW42 USER MANUAL...
  • Page 15 Choose File/Upload Firmware – when necessary, this is where you select a new firmware file and upload firmware. • Reset DA14 – will reset the ZIG-SW42 remotely. • Install Update – when necessary is for installing new software updates to the unit.
  • Page 16: Commands

    DA14-XXXX <sp> <parameter> <sp>... <parameter> <sp> <end of response> Commands (shown in RS-232 format): Help @SW42-XXXX help Shows a list of available commands Disco @SW42-XXXX disco Uptime @SW42-XXXX uptime Shows day, hours, minutes and seconds the SW42 has been running. 16 ZIG-SW42 USER MANUAL...
  • Page 17 Version @SW42-XXXX version Shows Zigen SW42, firmware release, firware revision, build date and serial number. Get Device Status @SW42-XXXX st Shows active and inactive ports – ex. Port 1 active, port 2 off, etc. HDMI Input Selection @SW42-XXXX insel <1|2|3|4>...
  • Page 18: Warranty

    Such specific warranties are available upon request to ZIGEN. ZIGEN makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold. The liability of ZIGEN with respect to any defective products will be limited to the repair or replacement of such products.

Table of Contents