Advertisement
Quick Links
TV Streamer
Pairing
The TV Streamer must be paired to interact with compatible 2.4 GHz hearing aids on the Thrive platform.
Pairing occurs once, then the hearing aids and TV Streamer will automatically recognize each other.
Power off your smart device or other accessories
1
that were previously paired with your hearing aids.
Ensure the TV Streamer is powered on.
2
Power off, then power on your hearing aids to
3
place in pairing mode.
4
Place your hearing aids within 6 inches
of the TV Streamer.
Basic Setup
Power Supply Jack (microUSB)
A
Toslink Jack
B
Analog 3.5mm Jack
C
Mono/Stereo Switch
D
1
Remove the plastic caps from each end of the
TOSLINK cable.
Plug the TOSLINK cable into the Audio OUT
2
jack of your television. If there is no TOSLINK
audio OUT jack, use a 3.5mm to RCA cable.
Power on your television.
3
Plug the other end of the TOSLINK cable
4
into the rear of the TV Streamer
Volume down
5
6
A
B
C
5
6
7
8
.
B
Volume up
Press the pairing button on the TV
Streamer to place in pairing mode.
The LED will rapidly blink blue.
Once the LED blinks green
for each hearing aid, both
hearing aids are paired.
D
Insert the power adapter microUSB connector
into the rear of the TV Streamer
Plug the power adapter into the wall socket.
Turn on the TV Streamer. A solid green LED
indicates power is on.
A solid blue LED indicates the TV Streamer
has detected audio and is streaming.
Power on/off
Pair
5
.
A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Starkey TV Streamer
Summary of Contents for Starkey TV Streamer
- Page 1 Pair Pairing The TV Streamer must be paired to interact with compatible 2.4 GHz hearing aids on the Thrive platform. Pairing occurs once, then the hearing aids and TV Streamer will automatically recognize each other. Power off your smart device or other accessories Press the pairing button on the TV that were previously paired with your hearing aids.
- Page 2 Thrive Hearing Control app. Double Tap feature only available on AI products. | The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Starkey is under license.
Need help?
Do you have a question about the TV Streamer and is the answer not in the manual?
Questions and answers
Pair headphones to streamer
To pair hearing aids to the Starkey TV Streamer, follow these steps:
1. Ensure the TV Streamer is plugged into the audio output of your TV and connected to a power outlet.
2. Put the hearing aids in pairing mode near the TV Streamer.
3. Wait for two green flashes on the TV Streamer, which indicate a successful pairing.
4. Once paired, you can start streaming audio by selecting the TV icon in the Thrive Hearing Control app or using other controls as applicable.
This answer is automatically generated
Can I split the optical out on my TV to feed both the Starkey Streamer and another device like an amplifier? So far, Streamer will not send signal to hearing aids if optical cable is split.