Assembly - Fisher F44 Owner's Manual

ASSEMBLY

Tool Required: #1 Phillips Screwdriver
• Remove the Screw from the Armrest.
1
• Slide the Armrest over the end
of the S-Rod.
• Attach with Screw and Lock-Nut.
Attach Control Housing with Screws;
2
install back screw first.
NOTE:
• The Handgrip fits under the Control
Housing.
Handgrip may partially cover one
mounting hole. Peel back
Handgrip to expose the front hole.
• Ensure the headphone jack cover
is properly seated before
attaching the control housing.
Caution:
Forcing in MIDDLE STEM with CAM LOCK raised may
form a burr on cam lock. If this happens, remove burr with
knife to allow insertion.
*
Note: Very tall users can purchase the optional
Extended Lower Stem (TUBE5X), for extended reach.
Battery
Compartment
(back side)
Place Headphone
Jack Cover in
recessed pocket
so it is level with
the surface of the
housing and held
in place between
the housing
and S-Rod. Triangulated
Concentric
Elliptical
Waterproof
Searchcoil
*
5