Table of Contents
Advertisement
MENU
The Menu is located on the left side of the screen. During normal operation the
Menu is inactive and the text icons are faded. Press the
through the menu options. When active, the icon will be bold. Each press of
the
moves to the next Menu item. Use
adjustments up or down. Here is a description of the Menu options:
Adjust speaker volume from 0 to 20. The default setting is 7. With a setting of
VOLUME
"0", the detector will function as normal but it will not emit any sound when
targets are detected.
The F44 has FeTone™, adjustable Iron audio, a feature to reduce the volume
of iron targets to minimize user fatigue.
Volume settings of 10 – 20 are available to control the volume level of the iron
targets. As you increase volume from 10 to 20, iron-volume changes from
silent to maximum. At each of the 10 – 20 volume settings, nonferrous target
response remains at maximum volume. At volume settings 0 – 9 both ferrous
and nonferrous targets have equal volume.
Example: at volume setting 15, nonferrous target volume is maximum, ferrous
target volume is at "5", or half volume.
Table describes ferrous and nonferrous volume at each setting
Nonferrous
1
Setting
2
3
4
5
6
7
8
9
10
10
Volume settings will be saved when the detector is turned off.
Adjust the sensitivity from 1 to 20. The default setting is 12. The higher the
SENS
number, the more sensitive the detector.
If the detector beeps erratically or beeps when there are no metal objects
being detected, reduce the sensitivity.
The searchcoil produces a magnetic field and then detects changes in that
magnetic field caused by the presence of metal objects. This magnetic field
the detector creates is also susceptible to electromagnetic energy (EMI)
produced by other electronic devices. Electric fences, cell phones, cell phone
towers, etc., all produce EMI which can interfere with the detector and cause
it to beep when no metal is present and sometimes to beep erratically.
Sensitivity settings will be saved when the detector is turned off.
Volume
Ferrous
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
within each menu item to make
Nonferrous
11
10
Setting
12
10
13
10
14
10
15
10
16
10
17
10
18
10
19
10
20
10
button to cycle
Volume
Ferrous
1
2
3
4
5
6
7
8
9
10
13
Hide quick links:
Advertisement
Table of Contents
